ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Δευτέρα 24/06/2024 (Αγίου Πνεύματος) η εταιρεία θα παραμείνει κλειστή.

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
24
Mosaic Filament Switch
1221.010
Limit switches located inside Palette 2 (Pro & S). These switches are located at ingoing drives and in the buffer zone. Please follow the replacement steps here . Ξεστοκάρισμα χωρίς εγγυήση.
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Original Prusa MINI MINDA probe (set)
1145.125
This product is the replacement M.I.N.D.A. probe set for the Original Prusa MINI. This product includes: MINDA probe (1 pcs) MINI FAN SPACER CLIP (1 pcs) MINI FAN SPACER (1 pcs) MINI MINDA HOLDER (1 pcs) Screws: M3x20 (1 pcs) Zip-tie 2,5x160 (5 pcs) To replace the...
BrandPRUSA RESEARCH Printer CompatibilityMINI
€23.89
χωρίς ΦΠΑ €19.27
Σε Απόθεμα
+ −
1L eSun Standard Resin Yellow 395-405nm
1212.095
€56.00
χωρίς ΦΠΑ €45.16
Σε Απόθεμα
+ −
1Kg eSun eTwinkling Blue PLA 1.75mm
1212.098
DIMENSION CENTER HOLE ø54 mm VENDOR eSUN COLOUR Blue COLOUR ATTRIBUTE Tindrande COLOUR NAME Red FILAMENT DIMENSION 1.75 mm MATERIAL PLA MATERIAL VARIETY eTwinkling MATERIAL WEIGHT 1000 g SHORE HARDNESS(A) N/A REEL SIZE ø200 mm x 72...
€23.89
χωρίς ΦΠΑ €19.27
Σε Απόθεμα
+ −
Mosaic Palette 2S Splice Tube
1221.007
Custom, precision machined, Splice Core S Teflon tube. The replacement instructions can be found here . Ξεστοκάρισμα χωρίς εγγυήση.
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
1L eSun Standard Resin Green 395-405nm
1212.096
€56.00
χωρίς ΦΠΑ €45.16
Σε Απόθεμα
+ −
Original E3D Hemera Hot Side
1134.119
This kit contains: 1 x E3D Hemera heatbreak 1 x Brass V6 Nozzle (1.75mm, 0.4mm) 1 x V6 heater block 1 x V6 silicone sock 1 x Thermal compound paste
€31.00
χωρίς ΦΠΑ €25.00
Σε Απόθεμα
+ −
Original E3D V6 Threaded Heatsink
1134.100
An alternative to Groovemount There are a couple of major flaws with groovemounting (or previous standard HotEnd mounting style): Fit is highly dependent on quality of part machining Fit can become loose from repeated removal and refitting To fight these problems, we're...
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Ceramic Cartridge Wire Heater 24V 40W for Arduino 3D Printer Prusa Reprap
1256.494
Voltage: 24v Power: 40w Material: Stainless Steel Diameter: 6mm Length: 20mm Wire Length :1m
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Original BondTech Set screw M4x3
1143.028
M4x3 used with primary gear with inner diameter 8 mm.
€0.19
χωρίς ΦΠΑ €0.15
Σε Απόθεμα
+ −
Original Prusa SuperPINDA
1145.140
SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). When replacing the original probe with SuperPINDA make sure to use the 3.9.2 or higher firmware version. SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor. Making...
BrandPRUSA RESEARCH Printer CompatibilityMINI+, MK2.5S, MINI, MK2.5, MK3, MK3S, MK3S+, MK3.5
€28.89
χωρίς ΦΠΑ €23.30
Σε Απόθεμα
+ −
Original Prusa Assembled hotend (MK3S+)
1145.141
This product includes: Nozzle V6 E3D (1 pcs) Hotend heaterblock E3D (1 pcs) Hotend heatbreak E3D (MK3/S, MK2.5/S, MMU2S) (1 pcs) Hotend heatsink E3D (1 pcs) Heatsink collet E3D (1 pcs) Hotend PTFE tube (MK3S+, MMU2S) (1 pcs) Hotend heater cartridge E3D 24V 40W (1 pcs)...
BrandPRUSA RESEARCH Printer CompatibilityMK3S+, MK3.5
€94.90
χωρίς ΦΠΑ €76.53
Σε Απόθεμα
+ −
έκπτωση 40%
έκπτωση 40%
Original Prusa Hotend PTFE tube (MK3S+, MMU2S)
1145.144
This product is the replacement hotend PTFE tube. It is ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends. It is NOT compatible with the MK2.5, MK3, MK3S hotends. This product includes: Hotend PTFE tube (1 pcs) Specifications: Length: 42.3 mm (tolerance +/- 0.2...
BrandPRUSA RESEARCH Printer CompatibilityMMU2S, MMU3, MK3S+, MK3.5
€2.00 €1.20
Κερδίζετε: €0.79 χωρίς ΦΠΑ €0.97
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 3.00mm (Throat)
1134.121
This is a replacement HeatBreak for E3D-v6 3.00mm HotEnds.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
1524-2GT-6 Rubber Close Loop - Timing Belt
1256.258
Type: Closed-Loop GT2 Pitch: 2mm Circumference (mm): 1524 Belt Height: 1.52 mm Tooth Height: 0.76mm Width: 6mm
€8.73
χωρίς ΦΠΑ €7.04
Σε Απόθεμα
+ −
1kg eSun Grey ePLA-ST 1.75mm
1212.100
It has the characteristics of high impact resistance, high elongation at break, high bonding strength and high printing accuracy. There is no need to heat the bed or print in a closed chamber, and no warping when print large models. Comparison of physical performance indicators：...
€26.90
χωρίς ΦΠΑ €21.69
Σε Απόθεμα
+ −
Original Prusa Satin Powder-coated Steel Sheet
1145.143
Double-sided satin powder-coated spring steel sheet for Original Prusa i3 MK3/S/+ and MK2.5/S heatbeds. OVERVIEW: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. The Satin sheet further expands our...
BrandPRUSA RESEARCH Printer CompatibilityMK2.5, MK2.5S, MK3, MK3S+, MK4, MK3.5, MK3.9
€59.90
χωρίς ΦΠΑ €48.31
Σε Απόθεμα
+ −
PrimaCreator FlexPlate Powder Coated PEI 410x410mm - Fits(CR-10-S4, Raptor, T-Rex, gCreate, gMax)
1142.036
Fits: Creality CR-10S4, German RepRap X400, FORMBOT Raptor, T-REX and 2+ , Vivedino T-Rex 3.0 and Raptor 2, gCreate gMax. The new Powder Coated FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and...
€80.90
χωρίς ΦΠΑ €65.24
Σε Απόθεμα
+ −
Original Prusa Hotend thermistor (MINI/+)
1145.147
This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length:   840 mm
BrandPRUSA RESEARCH Printer CompatibilityMINI, MINI+
€11.00
χωρίς ΦΠΑ €8.87
Μη Διαθέσιμο
Original Prusa ABS Juice (Granule Only - Needs Acetone)
1145.036
You will need ABS Juice if you own older types of our printers. With the Original Prusa i3 MK2 / S, MK2.5 and MK3 you don't need to use ABS Juice anymore.
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
Original E3D Hemera Idler Kit
1134.117
This kit contains: 1 x Idler 1 x Slide block 1 x Spring block 1 x Thumbwheel 1 x M3 square nut 1 x Idler shaft
€7.50
χωρίς ΦΠΑ €6.05
Σε Απόθεμα
+ −
Original Prusa Hotend fan MK3/S/+
1145.010
This product is the replacement Hotend fan. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly. This product includes: Hotend fan (1 pcs) Fasteners
BrandPRUSA RESEARCH Printer CompatibilityMK2.5, MK2.5S, MK3, MK3S, MK3S+
€16.90
χωρίς ΦΠΑ €13.63
Σε Απόθεμα
+ −
1Kg eSun Peach Pink ePLA-Matte 1.75mm
1212.109
ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. Compared with ABS, ePLA-Matte has higher rigidity and PC-like strength and does not require a closed cavity, with low shrinkage, no warping and no cracking quality, and suitable for large-size model...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun Mint Green ePLA-Matte 1.75mm
1212.110
ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. Compared with ABS, ePLA-Matte has higher rigidity and PC-like strength and does not require a closed cavity, with low shrinkage, no warping and no cracking quality, and suitable for large-size model...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Επόμενα 24 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ