Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

1Kg eSun Mint Green ePLA-Matte 1.75mm
Κωδικός e-Wireless: 1212.110

BrandeSUN MPNMind Green ePLA-Matte 1.75mm
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί e-Wireless;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

E-WIRELESS

Αναλυτική Παρουσίαση

ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. Compared with ABS, ePLA-Matte has higher rigidity and PC-like strength and does not require a closed cavity, with low shrinkage, no warping and no cracking quality, and suitable for large-size model printing; The support is easy to peel from the surface with a  smooth and flat contact surface; There will be no irritating odor during printing, which is safe and environmentally friendly; And the reel is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte surface is delicate and does not show layer lines; the filament is not easy to break which made the printing is smooth for a long time without clogging. It can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.

 

Features:
Environmental friendly
Cost-effective
High-speed printing
Easy to peel off the support 
Excellent printability
Hard to break
Matte surface effect
Low density

3D PRINTING FILAMENT ePLA-Matte
Density(g/cm3) 1.174
Heat Distortion Temp(℃,0.45MPa) 51
5/10
Melt Flow Index(g/10min) 2.1(190℃/2.16kg)
Tensile Strength(MPa) 34.56
3/10
Elongation at Break(%) 56.1
5/10
Flexural Strength(MPa) 41.21
4/10
Flexural Modulus(MPa) 1119.41
2/10
IZOD Impact Strength(kJ/㎡) 33.15
7/10
Durability 4/10
Printability 9/10
Extruder Temperature(℃) 190 - 230℃
Recommended temperature 215℃
Bed temperature(℃) 45 - 60°C
Fan Speed 100%
Printing Speed 40 - 100mm/s
Heated Bed       Optional
Recommended Build Surfaces 美纹纸,PVP固体胶,PEI

e-Wireless

Τεχνικές Προδιαγραφές

Brand:
eSUN
MPN:
Mind Green ePLA-Matte 1.75mm
SFP28 (25G):

e-Wireless

Ρωτήστε μας

e-Wireless

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

e-Wireless

BEST SELLERS

e-Wireless

BEST SELLERS