2118502484

1kg eSun Grey ePLA-ST 1.75mm
Κωδικός e-Wireless: 1212.100

BrandeSUN MPNGrey ePLA-ST 1.75mm

€26.90

χωρίς ΦΠΑ €21.69

Σε Απόθεμα

Ποσότητα:

+ −

Αποστολές & Επιστροφές

Επιστροφές εντός 14 ημερών - Υπο Προϋποθέσεις
ΕΛΤΑ COURIER απο 1,77€ + ΦΠΑ
ACS COURIER απο 2,00€ + ΦΠΑ
ΠΡΑΚΤΟΡΕΙΟ για πάνω απο 25kg - Τρίτες και Πέμπτες - Χρέωση Παραλήπτη
Παραλαβή από έδρα

Τρόποι πληρωμής

Γιατί e-Wireless;

It has the characteristics of high impact resistance, high elongation at break, high bonding strength and high printing accuracy. There is no need to heat the bed or print in a closed chamber, and no warping when print large models.

Comparison of physical performance indicators：

Project	PLA	PLA+	ePLA-ST
Appearance	white	white	white
Tensile Strength	78Mpa	63Mpa	34.3Mpa
Elongation at break	14%	20%	90%
Bending strength	90Mpa	74Mpa	43Mpa
Flexural modulus	1984Mpa	1934Mpa	1477Mpa
Notch impact	5.6	9	63

Printing parameters：

Material name	ePLA-ST
Recommended printing temperature	210-230℃
Bottom plate	45 - 60°C(Masking paper, PVP solid glue, glass board, carbon fiber board, PEI)
Fan	100%
Printing speed	40-100mm/s

Print performance comparison：

	PLA	PLA+	ePLA-ST	Conclusion
Surface finish	Normal	No obvious layering	No obvious layering	ePLA-ST≈PLA+>PLA
Hole column fitting model (The smaller the value, the better)	0.3mm	0.3mm	0.3mm	ePLA-ST=PLA+=PLA
Hanging model (The larger the value, the better)	<45°	<60°	<70°	ePLA-ST>PLA+>PLA
Suspension bridge (The larger the value, the better)	40mm	50mm	50mm	ePLA-ST=PLA+>PLA