ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
16
Original E3D V6 Brass Nozzle - 1.75mm x 0.80mm
1134.059
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.25mm
1134.053
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
AT2100 Stepstick Stepper Motor Driver With Heat Sink
1215.685
Supply Voltage: 3.3V-5V Dissipation Power: 2.5A Operating Temperature: -40°-+85°
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
1Kg eSun Orange PETG 1.75mm
1212.062
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
CNC / router / engraver MACH3 Tool Setting Auto-leveling instrument
1215.623
High precision ground block for drill bit leveling. Diameter : (Approx.) 35mm Height : (Approx.) 20mm Effective surface of the cutting tool: 25mm diameter Including alligator clips. Cable length : 1.2 m, diameter : 0.2 square feet. Usage : Positive (Z-endstop) wire connects from the drill...
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
1Kg eSun Yellow PETG 1.75mm
1212.061
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
1.75mm Filament Detector (Run Out Monitor)
1140.004
Generally, the 3D printer DIY kit is not able to detect running out of filament, it will continue to print until file is completed even if the filament runs out. This always leads to incomplete printing which will be wasting your time and filament, this detection module will complete fixed...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
Creality 3D CR-10 S4 Y-axis belt
1156.013
Creality 3D CR-10 S4 Y-axis belt
€6.57
χωρίς ΦΠΑ €5.30
Μη Διαθέσιμο
έκπτωση 7%
έκπτωση 7%
24V Fan 40x40x10mm (3pin)
1256.010
Wire:3pin Dimensions: 40X40X10mm Rated Voltage: DC 24V Rated Current: 0.12±0.03 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Cable Length:15cm
€3.92 €3.63
Κερδίζετε: €0.29 χωρίς ΦΠΑ €2.93
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 12v 40w
1134.052
12v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly-toleranced enamel resistors and switch to a purpose-made high-power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a meter of sillicone...
€9.18
χωρίς ΦΠΑ €7.40
Μη Διαθέσιμο
Prusament 1.75mm PLA Galaxy Purple 1kg
1145.103
ABOUT PLA PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Inductive Proximity Sensor Switch - NPN NC DC6-36V M8 (LJ8A3-2-Z/AX)
1215.978
Product Name: Inductive Proximity Switch Model: LJ8A3-2-Z/AX Wire Type : DC 3 Wire (Brown ,Black, Blue) NPN; Switch Appearance Type : Cylinder Theory : Inductive Sensor; Output Type : NC(Normal Closed) Diameter of Head : 8mm; Detecting Distance : 2±10%mm Detecting...
€4.36
χωρίς ΦΠΑ €3.52
Σε Απόθεμα
+ −
1Kg eSun Luminous Green PLA+ 1.75mm
1212.049
PLA material is less distortion than ABS (Acrylonitrile Butadiene Styrene), heater bed do not necessarily need to Environmentally friendly and is one of the Biokompatiblen plastics Non flammable and is suitable for large 3D printing results High-quality premium filament – Airtight and...
€24.90
χωρίς ΦΠΑ €20.08
Σε Απόθεμα
+ −
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
1147.016
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.60mm
1134.058
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Επόμενα 16 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ