ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
64
Original Prusa Selector front plate black MMU2
1145.081
An extra plastic part for your 3D printer, make sure you are ordering the correct part and color. Part name on GitHub: mmu2-selector-front-plate
BrandPRUSA RESEARCH Printer CompatibilityMMU2
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.25mm
1134.082
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.47
χωρίς ΦΠΑ €21.35
Μη Διαθέσιμο
1Kg eSun eSilk Jacinth PLA 1.75mm
1212.076
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
1Kg eSun Pink PLA+ 1.75mm
1212.038
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Monocure UV Resin 1000ml Blue
1213.001
PHYSICAL PROPERTIES Colour Blue (10% transparency) Viscosity 500 - 600cps @ 25°C (Brookfield RVT) Odour Negligible Characteristics Shelf Life 12 months Active Solids 100% UV Cure 225nm to 420nm Cure...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Original E3D Titan Replacement Kit - Bearings & Lid
1134.046
This kit contains the new Tritan Titan lid & two new bearings suitable for Titan and Titan Aero. Previous to February 2018, Titan lids were made of polycarbonate and occasional failure was occuring due to the the chemical composition of bearing lubricant. The solution to this is now...
€5.08
χωρίς ΦΠΑ €4.10
Μη Διαθέσιμο
Wanhao UV Resin 1000ml Orange
1206.005
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€53.32
χωρίς ΦΠΑ €43.00
Σε Απόθεμα
+ −
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 1.20mm
1134.094
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Σε Απόθεμα
+ −
1Kg eSun Peak Green ABS+ 1.75mm
1212.056
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Μη Διαθέσιμο
Original Prusa Hotend heaterblock MINI/+
1145.115
This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+. This product includes: Hotend heaterblock MINI/+ (1 pcs) Screws: M3x4 (1 pcs), M3x10r (1 pcs) Thermal paste (0.5g)   (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMINI, MINI+
€14.90
χωρίς ΦΠΑ €12.02
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.60mm
1134.062
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
0.5Kg eSun Green eMate 1.75mm
1212.027
Specification： - 1.75mm (Accuracy:1.7-1.8mm) Characteristics： - Biodegradable; - Better suppleness; - Low temperature printing (Best printing temperature of eMate is 80~100℃,normal materials' pr*inting temperature is 180~220℃); - be able to remodled.
€25.80
χωρίς ΦΠΑ €20.81
Σε Απόθεμα
+ −
0.5Kg eSun Natural PVA 1.75mm
1212.017
Product features Work as a supporting material for PLA and some other materials, but not for ABS. Printing temp. is 190~220℃. Original manufacturer. 100% Guaranteed Customer Satisfaction, Premium product. 1.75mm PVA filament with double layer sealed bags....
€43.00
χωρίς ΦΠΑ €34.68
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.30mm
1134.054
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
3D Printer Cooling Fan 24V 5015
1256.387
Name : 5015 Blower fan Fan dimension : 50x50x15mm Voltage/Power supply : 24V Bearing : oil bearing Wire Length : 15cm Rated Current : 0.15A±10% Speed : 3000±10% for RPM Noise Level : 20dba±10% 2 Pin Dupont
€2.91
χωρίς ΦΠΑ €2.35
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 1.20mm
1134.089
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D V6 Aluminum Heater Block
1134.107
This heater block works with our New Standard thermistor sensor for V6... Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor cartridge, instead of a...
€23.89
χωρίς ΦΠΑ €19.27
Μη Διαθέσιμο
Prusament 1.75mm PETG Terracotta 1kg
1145.133
ABOUT PETG PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our printers! PETG...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
0.5Kg eSun Red eMate 1.75mm
1212.025
Specification： - 1.75mm (Accuracy:1.7-1.8mm) Characteristics： - Biodegradable; - Better suppleness; - Low temperature printing (Best printing temperature of eMate is 80~100℃,normal materials' pr*inting temperature is 180~220℃); - be able to remodled.
€25.80
χωρίς ΦΠΑ €20.81
Σε Απόθεμα
+ −
Original Prusa Mini M.I.N.D.A. Probe
1145.113
This product includes: M.I.N.D.A. probe (1 pcs) To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.
BrandPRUSA RESEARCH Printer CompatibilityMINI
€14.88
χωρίς ΦΠΑ €12.00
Σε Απόθεμα
+ −
1Kg eSun eSilk Purple PLA 1.75mm
1212.081
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
1Kg eSun Blue ABS+ 1.75mm
1212.053
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10 S4 - 220V / 1000W - Without Controller & Thermistor
1140.712
Material: Synthetic Fiber Size:409 mm X 409mm Power: 1000W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10 S4 - 220V / 1000W - With Controller
1140.710
Material: Synthetic Fiber Size:409 mm X 409mm Power: 1000W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm Accessories: NTC 100K Thermistor+ 1m extension wire Other: 24 pre-made screw holes of dia 12mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Original Prusa Extruder-Print head PTFE tube (MINI/+)
1145.116
This product includes: Extruder-Print head PTFE tube (MINI/+) (1 pcs) Swivel nut (2 pcs) Pressed olive part (2 pcs) Specifications: Length: 275 mm Inner diameter: 2 mm Outer diameter: 4 mm
BrandPRUSA RESEARCH Printer CompatibilityMINI+, MINI
€3.70
χωρίς ΦΠΑ €2.98
Σε Απόθεμα
+ −
1Kg eSun Orange ABS+ 1.75mm
1212.055
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm
1134.122
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original Prusa MMU2S-Einsy power cable
1145.077
This product is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S. This product includes: MMU2S to Einsy power cable (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMMU2S, MK3, MK3S, MK3S+
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original Prusa Hotend heatbreak MINI/+
1145.122
This product is the replacement Hotend heatbreak MINI/+. It is ONLY compatible with the Original Prusa MINI/+. This product includes: Hotend heatbreak MINI/+ (1 pcs) Thermal paste (0.5g)   (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMINI, MINI+
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
1Kg eSun eSilk Lime PLA 1.75mm
1212.078
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
Original Prusa F.I.N.D.A. sensor
1145.079
This product includes: FINDA sensor (1 pcs) Specifications: Body diameter: 8 mm Connector: Molex 50-57-9403 Voltage: DC 5V Cable length: 360 mm
BrandPRUSA RESEARCH Printer CompatibilityMMU2S, MMU3
€18.60
χωρίς ΦΠΑ €15.00
Σε Απόθεμα
+ −
0.5Kg eSun Yellow eMate 1.75mm
1212.026
Specification： - 1.75mm (Accuracy:1.7-1.8mm) Characteristics： - Biodegradable; - Better suppleness; - Low temperature printing (Best printing temperature of eMate is 80~100℃,normal materials' pr*inting temperature is 180~220℃); - be able to remodled.
€25.80
χωρίς ΦΠΑ €20.81
Σε Απόθεμα
+ −
Original E3D SuperVolcano Heater Cartridge 24V 80W
1134.106
These 24V-80W heaters have been designed specifically for the needs of the SuperVolcano HotEnd and provide the much needed power in order to achieve the highest flow rate possible. These have an extra long 47.50mm heater cartridge to fit the fit the geometry of the SuperVolcano Block....
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
1Kg eSun eSilk Violet PLA 1.75mm
1212.077
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.40mm
1134.042
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original Prusa Filament sensor cover black MMU2
1145.080
An extra plastic part for your 3D printer from high quality PETG.  
BrandPRUSA RESEARCH Printer CompatibilityMMU2
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
PrimaCreator FlexPlate PEI 510x510mm - Fits CR-10-S5
1142.028
Fits: Creality CR-10 S5. The new FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the high quality spring steel sheet that is covered with a sheet of the best PEI Ultem . The...
€119.90
χωρίς ΦΠΑ €96.69
Σε Απόθεμα
+ −
Original Prusa Linear bearing LM8UU
1145.001
This product includes: Linear bearing LM8UU (1 pcs) Specifications: Length: 24 mm Outer diameter: 15 mm Inner diameter: 8 mm
BrandPRUSA RESEARCH Printer CompatibilityMINI+, MINI, MK2S, MK2.5S, MK2.5, MK2, MK3, MK3S, MK3S+, MK4, MK3.5, MK3.9
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Original E3D Groove Mount Bowden Adaptor for 4mm PTFE - 1.75mm Filament
1134.045
This is a neat little solution for quickly and easily converting a direct extruder that would normally accept a groovemount hotend into a bowden extruder. Simply mounts in like a Hot End, but instead accepts our PTFE tubing securely in an embedded bowden coupler. This is a neat little solution...
€9.05
χωρίς ΦΠΑ €7.30
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.25mm
1134.039
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.30mm
1134.040
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original Prusa Linear bearing LM10LUU
1145.118
This product includes: Linear bearing LM10LUU (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMINI+, MINI, MK4
€5.70
χωρίς ΦΠΑ €4.60
Σε Απόθεμα
+ −
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.40mm
1134.090
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 0.80mm
1134.087
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original Prusa Belt Y-axis
1145.120
This product includes: Belt Y-axis (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMINI, MINI+
€5.00
χωρίς ΦΠΑ €4.03
Μη Διαθέσιμο
1Kg eSun Red ABS+ 1.75mm
1212.054
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Σε Απόθεμα
+ −
1Kg eSun eSilk Dark Yellow PLA 1.75mm
1212.075
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materialsinto PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is environmentally...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
1Kg eSun Deep Black ePLA-Matte 1.75mm
1212.111
ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. Compared with ABS, ePLA-Matte has higher rigidity and PC-like strength and does not require a closed cavity, with low shrinkage, no warping and no cracking quality, and suitable for large-size model...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original Prusa MMU2S-Einsy/Rambo signal cable
1145.078
This product is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S. This product includes: MMU2S to Einsy/Rambo signal cable (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMK2.5S, MMU2S, MK3S, MK3S+
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Prusament 1.75mm PETG Pistachio 1kg
1145.132
ABOUT PETG PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Original E3D Geared Stepper Motor - 5.18:1 Reduction / 196Ncm Torque / 1.8° / 1.2A
1134.103
This motor uses a planetary gearbox with a 5.18:1 reduction. This gives you up to 196Ncm of torque without the need for high current stepper drivers, however you will not be able to run this motor as fast as a non-geared one. The main application of this motor is in direct extruders. NEMA...
€51.65
χωρίς ΦΠΑ €41.65
Μη Διαθέσιμο
1Kg eSun Dark Blue PLA+ 1.75mm
1212.102
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Red
1206.002
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€53.32
χωρίς ΦΠΑ €43.00
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.35mm
1134.041
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.40mm
1134.083
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.45
χωρίς ΦΠΑ €21.33
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.80mm
1134.092
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
1Kg eSun eTwinkling Black PLA 1.75mm
1212.089
DIMENSION CENTER HOLE ø54 mm VENDOR eSUN COLOUR Red COLOUR ATTRIBUTE Tindrande COLOUR NAME Red FILAMENT DIMENSION 1.75 mm...
€23.89
χωρίς ΦΠΑ €19.27
Σε Απόθεμα
+ −
Original E3D Hemera Bowden Kit 1.75mm
1134.116
Dual drive Hemera features a dual-drive, hardened stainless steel drive train, providing a huge boost in grip compared to single drive systems. As standard, it is fully capable of printing abrasive filaments without risk of premature wear. Mounting made easy The custom motor, based on a NEMA...
€149.90
χωρίς ΦΠΑ €120.89
Μη Διαθέσιμο
Original E3D High Precision Heater Cartridge 12V 30W
1134.079
A powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever. Key Features Highly precise temperature...
€27.53
χωρίς ΦΠΑ €22.20
Σε Απόθεμα
+ −
Mosaic Homing Switch
1221.009
Limit switch located at Palette's cutter. Please follow the replacement steps here . Ξεστοκάρισμα χωρίς εγγυήση.
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.20mm
1134.099
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original Prusa Hotend heatsink MINI/+
1145.119
This product is the replacement Hotend heatsink MINI/+. It is ONLY compatible with the Original Prusa MINI/+. This product includes: Hotend heatsink MINI (1 pcs) Threaded PTFE connection (1 pcs) Screws: M3x4 (3 pcs) Thermal paste (0.5g)   (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMINI, MINI+
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.80mm
1134.084
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.47
χωρίς ΦΠΑ €21.35
Μη Διαθέσιμο
Original Prusa Belt X-axis
1145.121
This product includes: Belt X-axis (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMINI+, MINI
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
Επόμενα 64 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ