ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
32
Original E3D Hobb-Goblin - 5mm ID Drive Gear
1134.013
Hobb-Goblin - 5mm ID Drive Gear for 3d Printers | E3D Online A wicked little filament drive gear made from stainless steel with really sharp little teeth cut into it. These are carefully manufactured on a synchronised CNC processs which gives a sharp, consistent, and clean cut tooth profile...
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
1Kg eSun Pine Green PLA+ 1.75mm
1212.042
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Bondtech Shaft 4mm, L=25 mm
1143.007
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.86
χωρίς ΦΠΑ €1.50
Σε Απόθεμα
+ −
Mosaic CANVAS Hub
1221.003
Ξεστοκάρισμα χωρίς εγγυήση. Introducing: CANVAS Hub CANVAS Hub is the keystone of Mosaic’s multi-material ecosystem. Think of it as the center of everything to do with multi-material printing, and the bridge that allows your hardware products to communicate with each other and come...
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
1Kg eSun Solid Red PETG 1.75mm
1212.021
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
5V 4010 Fan 40x40x10mm
1256.249
Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 5V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
1Kg eSun Light Brown PLA+ 1.75mm
1212.046
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun Black eASA 1.75mm
1212.073
Specification： - 1.75mm Characteristics： - With a similarity in structure, eASA has excellent mechanical physical property as engineering plastics. - Because the butadiene with double bond is replaced, eASA is given outstanding weather resistance, high temperature resistance and...
€35.90
χωρίς ΦΠΑ €28.95
Σε Απόθεμα
+ −
1Kg eSun Cold White ABS+ 1.75mm
1212.052
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Μη Διαθέσιμο
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.007
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Slimline Stepper Motor 1.4A / 0.9°
1134.047
A Nema17 12.7N-cm stepper motor with D-shaft and 1.0m wiring. Ultra-Slim NEMA17 Stepper Motors for use with your Titan extruder. Only 25mm body length, producing 12.7N-cm of torque these motors make an excellent choice for use on your extruder. These motors have been custom made for use with...
€20.71
χωρίς ΦΠΑ €16.70
Μη Διαθέσιμο
1Kg eSun Natural eTPU 95A 1.75mm
1212.072
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with...
€36.90
χωρίς ΦΠΑ €29.76
Σε Απόθεμα
+ −
1Kg eSun eSilk Gold PLA 1.75mm
1212.083
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
Original E3D Nozzle Pro Pack - 1.75mm
1134.065
This pack is the pinnacle of nozzle prowess, featuring six of our most exciting, useful and experimental nozzles. Brass, Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases. Not to mention, this pack means you get more...
€114.89
χωρίς ΦΠΑ €92.65
Μη Διαθέσιμο
AT2100 Stepstick Stepper Motor Driver With Heat Sink
1215.685
Supply Voltage: 3.3V-5V Dissipation Power: 2.5A Operating Temperature: -40°-+85°
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
1Kg eSun Peak Green PLA+ 1.75mm
1212.039
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.80mm
1134.059
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Creality 3D CR-10 S4 X-axis belt
1156.012
Creality 3D CR-10 S4 X-axis belt
€6.57
χωρίς ΦΠΑ €5.30
Σε Απόθεμα
+ −
Prusament 1.75mm PLA Galaxy Purple 1kg
1145.103
ABOUT PLA PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
1Kg eSun Orange PETG 1.75mm
1212.062
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
έκπτωση 7%
έκπτωση 7%
24V Fan 40x40x10mm (3pin)
1256.010
Wire:3pin Dimensions: 40X40X10mm Rated Voltage: DC 24V Rated Current: 0.12±0.03 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Cable Length:15cm
€3.92 €3.63
Κερδίζετε: €0.29 χωρίς ΦΠΑ €2.93
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.25mm
1134.053
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D Volcano 1.75mm Starter Pack 12V
1134.009
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
1Kg eSun Yellow PETG 1.75mm
1212.061
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original Bondtech Shaft 4mm, L=22 mm
1143.006
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.61
χωρίς ΦΠΑ €1.30
Σε Απόθεμα
+ −
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
1147.016
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
Creality 3D CR-10 S4 Y-axis belt
1156.013
Creality 3D CR-10 S4 Y-axis belt
€6.57
χωρίς ΦΠΑ €5.30
Μη Διαθέσιμο
1.75mm Filament Detector (Run Out Monitor)
1140.004
Generally, the 3D printer DIY kit is not able to detect running out of filament, it will continue to print until file is completed even if the filament runs out. This always leads to incomplete printing which will be wasting your time and filament, this detection module will complete fixed...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
Original E3D Chimera+ Air-Cooled 12v 1.75mm
1134.035
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€125.98
χωρίς ΦΠΑ €101.60
Σε Απόθεμα
+ −
TL-Smoother Filter Module For 3D Printer Stepper Motor
1215.731
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.50mm
1134.057
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
Επόμενα 32 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ