ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
24
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
1Kg eSun Natural PLA 1.75mm
1212.016
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - extracted and purified from corn grain; - high rigidity, good glossiness and transparency; - suitable for printing larger models; - toughness is 2 times more than the PLA on the market; - no...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Bondtech Drivegear kit 1.75mm / 5mm shaft
1143.001
Prusa i3 MK2/S Printable Extruder Parts for Bondtech Drivegear kit https://www.thingiverse.com/thing:2683976 You will need the following parts: 1 x Bondtech Direct Gearset 1 x M3 thread bushing 1 x Thumbscrew assembly (Screw, spring, washer) 1 x Pin 3×20 mm M3 screws Bondtech DualDrive...
€56.90
χωρίς ΦΠΑ €45.89
Σε Απόθεμα
+ −
Original E3D Thermal Compound Paste
1134.067
€1.90
χωρίς ΦΠΑ €1.53
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
1Kg eSun Light Blue PLA+ 1.75mm
1212.040
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
0.5Kg eSun Wood PLA 1.75mm
1212.022
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - 1. High quality wood texture - 2. Non toxic and no smelling - 3. No heated bed necessary, sticks well to print bed - 4. Low processing temperature(about 190℃) - 5. Low shrinkage and good toughness
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
2x United Chemi-Con APXG160ARA221MF80G Capacitor for Creality Faulty Tempratures Readings
1161.001
CR-10S V2.0/V2.1 C4 Replacement Capacitor – 2 Pack Replacement SMD Capacitor for C4 Capacitor on the CR-10S V2.0/V2.1 Boards Information on replacement here (DIY Guide Link on page): CR-10S V2.0/V2.1 Temperature Repair Guaranteed to fix the temperature fluctuation issue Exact...
€1.24
χωρίς ΦΠΑ €1.00
Σε Απόθεμα
+ −
1Kg eSun ePA & Carbon Fiber 1.75mm
1212.031
Features: eSUN ePA-CF Carbon Fiber Filled Nylon Filament, Used in Structural Parts, Tough Parts. 1KG Net (approximately 2.2lbs) Filament with Clear Spool. eSUN ePA-CF 3D Printer Filament Vacuumed Sealed with Desiccant. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended...
€63.00
χωρίς ΦΠΑ €50.81
Μη Διαθέσιμο
Original E3D Nozzle X V6-1.75mm-0.40mm
1134.102
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which...
€47.90
χωρίς ΦΠΑ €38.63
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Black Zaribo 320 Extrusion Kit by Misumi
1147.007
ll parts are factory cut and drilled with precision by Misumi engineers. Package content: X-Y Axis 2 HFSB-3030-354-Z8-XA12-XB342 x-axis 2 HFSB-3030-320-TPW-Z8-XA100 y-axis Z Axis 2 HFSB-3030-430-TPW Black 3030 Normal Rigidity...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 12V 30W
1134.017
3D Printer Ceramic Heater Cartridge - 12v - 30w | E3D Online | E3D Online 12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original Prusa MK2s/MK3 U-Bolts
1145.008
3 U-bolts for holding the LM8UUs on the MK2S Y-carriage. M3 nuts are included.
€9.99
χωρίς ΦΠΑ €8.06
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 30W
1134.018
3D Printer Ceramic Heater Cartridge - 24v - 30w | E3D Online | E3D Online 24v 30w Ceramic Heater Cartridge Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. These 30w heaters provide a fantastic balance of being...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original Prusa i3 MK2/s & MK3 Y-Axis Belt
1145.045
Y Axis belt for Original Prusa i3 MK2/S and MK3.
€6.60
χωρίς ΦΠΑ €5.32
Σε Απόθεμα
+ −
Genuine Einsy Rambo 1.1 by Ultimachine
1147.005
This is Einsy Rambo 1.1a. The Einsy Rambo board is an all in one 3D printer motherboard. It is a compact version of our RAMBo v1.3L design with the Arduino MEGA and stepper drivers all on one integrated PCB. A great alternative board if you need just the basics! Major Features - 4 x integrated...
€133.80
χωρίς ΦΠΑ €107.90
Σε Απόθεμα
+ −
12V Fan 90x90x25mm (OEM)
1140.191
Rated Voltage : DC 12V External Material : Plastic Main Color : Black Connector : 2 Pin Size : 90 x 90x 25mm/ 3.5" x 3.5" x 1" (L*W*H) Cable Length : 17cm/ 6.6" Weight : 62g Provides excellent air ventilation for your PC case, computer CPU fan, or other matched radiator....
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Black Zaribo 220 Extrusion Kit by Misumi
1147.008
All parts are factory cut and drilled with precision by Misumi engineers. Package content: X-Y Axis 2 HFSB-3030-354-Z8-XA12-XB342 x-axis 2 HFSB-3030-320-TPW-Z8-XA100 y-axis Z Axis 2 HFSB-3030-330-TPW Black anodize 3030 Normal...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
DMA860H CNC Stepper Drive Stepping Motor Driver
1140.790
Features • Good high speed performance • Supply voltage up to 80VAC or +110VDC • Output current up to 7.2A • Self-adjusting technology • Pure-sinusoidal current control technology • Pulse input frequency up to 300 KHz • TTL compatible and optically isolated input •...
€60.46
χωρίς ΦΠΑ €48.76
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€74.40
χωρίς ΦΠΑ €60.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.006
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original Prusa Timing pulley T16-2GT (MK3/S/+, MK2.5/S, MΚ2/S, MINI/+)
1145.002
This product includes: Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 GT2-16 Pulley
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
1Kg eSun Solid Silver PETG 1.75mm
1212.064
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Επόμενα 24 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ