ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

E3D-Online

Ταξινόμηση:
Δημοφιλέστερα
24
Original E3D Brass Volcano Nozzle - 1.75mm x 0.60mm
1134.086
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D SuperVolcano Heater Cartridge 24V 80W
1134.106
These 24V-80W heaters have been designed specifically for the needs of the SuperVolcano HotEnd and provide the much needed power in order to achieve the highest flow rate possible. These have an extra long 47.50mm heater cartridge to fit the fit the geometry of the SuperVolcano Block....
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Groove Mount Bowden Adaptor for 4mm PTFE - 1.75mm Filament
1134.045
This is a neat little solution for quickly and easily converting a direct extruder that would normally accept a groovemount hotend into a bowden extruder. Simply mounts in like a Hot End, but instead accepts our PTFE tubing securely in an embedded bowden coupler. This is a neat little solution...
€9.05
χωρίς ΦΠΑ €7.30
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.35mm
1134.055
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€11.41
χωρίς ΦΠΑ €9.20
Σε Απόθεμα
+ −
Original E3D Brass Volcano Nozzle - 1.75mm x 1.00mm
1134.088
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 1.20mm
1134.094
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Σε Απόθεμα
+ −
Original E3D Geared Stepper Motor - 5.18:1 Reduction / 196Ncm Torque / 1.8° / 1.2A
1134.103
This motor uses a planetary gearbox with a 5.18:1 reduction. This gives you up to 196Ncm of torque without the need for high current stepper drivers, however you will not be able to run this motor as fast as a non-geared one. The main application of this motor is in direct extruders. NEMA...
€51.65
χωρίς ΦΠΑ €41.65
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.60mm
1134.062
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.25mm
1134.082
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.47
χωρίς ΦΠΑ €21.35
Μη Διαθέσιμο
Original E3D High Precision Heater Cartridge 12V 30W
1134.079
A powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever. Key Features Highly precise temperature...
€27.53
χωρίς ΦΠΑ €22.20
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.30mm
1134.054
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D Hemera Bowden Kit 1.75mm
1134.116
Dual drive Hemera features a dual-drive, hardened stainless steel drive train, providing a huge boost in grip compared to single drive systems. As standard, it is fully capable of printing abrasive filaments without risk of premature wear. Mounting made easy The custom motor, based on a NEMA...
€149.90
χωρίς ΦΠΑ €120.89
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 1.20mm
1134.089
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Plated Copper Volcano Block
1134.101
Print big and fast! The plated copper Volcano upgrades your V6 or Aero HotEnd to print bigger, faster, and stronger parts. Easily swap your heater block out for this block This listing is for the Plated Copper block only. The Plated Copper-Alloy Volcano Heater Block: These blocks are...
€43.59
χωρίς ΦΠΑ €35.15
Μη Διαθέσιμο
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.40mm
1134.042
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.40mm
1134.090
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D SuperVolcano Upgrade Kit (Eruption pack)
1134.108
Eruption Pack 1 x Plated Copper SuperVolcano Heater Block 1 x Thermistor 1 x Thermistor Extension Cable 1 x Silicone Glass Fibre Sleeving 1 x 80W Heater Cartridge 1 x Brass 0.8mm, 1mm, 1.2mm and 1.4mm Nozzle 1 x Thermal Paste 4 x M3 Grub Screws 1 x Hex Key
€192.51
χωρίς ΦΠΑ €155.25
Μη Διαθέσιμο
Original E3D Hobb-Goblin - 8mm Hobbed Shaft Kit
1134.066
A wicked little filament drive hobbed shaft made from stainless steel with really sharp little teeth cut into it. They're carefully manufactured on a synchronised CNC process which gives a sharp, consistent, and clean cut tooth profile that has incredibly good grip. We've tested these with...
€16.68
χωρίς ΦΠΑ €13.45
Σε Απόθεμα
+ −
Original E3D Hemera Hot Side
1134.119
This kit contains: 1 x E3D Hemera heatbreak 1 x Brass V6 Nozzle (1.75mm, 0.4mm) 1 x V6 heater block 1 x V6 silicone sock 1 x Thermal compound paste
€42.90
χωρίς ΦΠΑ €34.60
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.25mm
1134.039
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.30mm
1134.040
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Brass Volcano Nozzle - 1.75mm x 0.80mm
1134.087
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.20mm
1134.099
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.80mm
1134.092
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Επόμενα 19 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ