E3D-Online

Original E3D Water Cooling Kit for Titan Aqua

ΚΩΔΙΚΟΣ: 1134.025

ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....

BrandE3D

€152.89

χωρίς ΦΠΑ €123.30

Σε Απόθεμα

+ −

Original E3D Volcano Silicone Sock

ΚΩΔΙΚΟΣ: 1134.011

Silicone Socks for E3D Volcano Heater Block and Nozzles These socks will keep your heater block clean and free from burnt and blackened plastic. They don’t just keep the block clean, but also keep heat inside the HotEnd and off your print. Made of a heat-resistant, non-stick silicone...

BrandE3D

€3.47

χωρίς ΦΠΑ €2.80

Σε Απόθεμα

+ −

Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.20mm

ΚΩΔΙΚΟΣ: 1134.099

NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...

BrandE3D

€24.80

χωρίς ΦΠΑ €20.00

Σε Απόθεμα

+ −

Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.00mm

ΚΩΔΙΚΟΣ: 1134.098

NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...

BrandE3D

€24.80

χωρίς ΦΠΑ €20.00

Σε Απόθεμα

+ −

Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.80mm

ΚΩΔΙΚΟΣ: 1134.097

NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...

BrandE3D

€24.80

χωρίς ΦΠΑ €20.00

Σε Απόθεμα

+ −

Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.60mm

ΚΩΔΙΚΟΣ: 1134.096

NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...

BrandE3D

€24.80

χωρίς ΦΠΑ €20.00

Σε Απόθεμα

+ −

Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.40mm

ΚΩΔΙΚΟΣ: 1134.095

NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...

BrandE3D

€24.80

χωρίς ΦΠΑ €20.00

Σε Απόθεμα

+ −

Original E3D Volcano Eruption Pack 24V

ΚΩΔΙΚΟΣ: 1134.114

Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...

BrandE3D

€57.04

χωρίς ΦΠΑ €46.00

Μη Διαθέσιμο

Original E3D Volcano 1.75mm Starter Pack 24V

ΚΩΔΙΚΟΣ: 1134.010

Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...

BrandE3D

€49.60

χωρίς ΦΠΑ €40.00

Μη Διαθέσιμο

Original E3D Volcano 1.75mm Starter Pack 12V

ΚΩΔΙΚΟΣ: 1134.009

// // <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...

BrandE3D

€49.60

χωρίς ΦΠΑ €40.00

Μη Διαθέσιμο

Original E3D V6 Threaded Heatsink

ΚΩΔΙΚΟΣ: 1134.100

An alternative to Groovemount There are a couple of major flaws with groovemounting (or previous standard HotEnd mounting style): Fit is highly dependent on quality of part machining Fit can become loose from repeated removal and refitting To fight these problems, we're...

BrandE3D

€23.00

χωρίς ΦΠΑ €18.55

Σε Απόθεμα

+ −

Original E3D V6 Silicone Sock

ΚΩΔΙΚΟΣ: 1134.014

Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...

BrandE3D

€2.50

χωρίς ΦΠΑ €2.02

Μη Διαθέσιμο

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm

ΚΩΔΙΚΟΣ: 1134.122

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.26

χωρίς ΦΠΑ €13.92

Μη Διαθέσιμο

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm

ΚΩΔΙΚΟΣ: 1134.034

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.26

χωρίς ΦΠΑ €13.92

Σε Απόθεμα

+ −

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.35mm

ΚΩΔΙΚΟΣ: 1134.033

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.24

χωρίς ΦΠΑ €13.90

Σε Απόθεμα

+ −

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.30mm

ΚΩΔΙΚΟΣ: 1134.032

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.26

χωρίς ΦΠΑ €13.92

Σε Απόθεμα

+ −

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.25mm

ΚΩΔΙΚΟΣ: 1134.031

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.26

χωρίς ΦΠΑ €13.92

Μη Διαθέσιμο

Original E3D v6 Plated Copper Heater Block

ΚΩΔΙΚΟΣ: 1134.029

Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond...

BrandE3D

€37.20

χωρίς ΦΠΑ €30.00

Σε Απόθεμα

+ −

Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)

ΚΩΔΙΚΟΣ: 1134.004

The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...

BrandE3D

€74.40

χωρίς ΦΠΑ €60.00

Σε Απόθεμα

+ −

Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)

ΚΩΔΙΚΟΣ: 1134.001

The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...

BrandE3D

€86.80

χωρίς ΦΠΑ €70.00

Μη Διαθέσιμο

Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)

ΚΩΔΙΚΟΣ: 1134.003

The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...

BrandE3D

€93.00

χωρίς ΦΠΑ €75.00

Μη Διαθέσιμο

Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)

ΚΩΔΙΚΟΣ: 1134.002

The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...

BrandE3D

€93.00

χωρίς ΦΠΑ €75.00

Σε Απόθεμα

+ −

Original E3D v6 Heat Break 1.75mm (Throat)

ΚΩΔΙΚΟΣ: 1134.027

This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...

BrandE3D

€21.70

χωρίς ΦΠΑ €17.50

Σε Απόθεμα

+ −

Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.80mm

ΚΩΔΙΚΟΣ: 1134.063

If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...

€29.45

χωρίς ΦΠΑ €23.75

Μη Διαθέσιμο