ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Build it yourself

Ταξινόμηση:
Δημοφιλέστερα
32
StaticBoards Ramps 1.4 SB Premium Board
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
10cm Original Capricorn PTFE (Teflon) 1.9x4mm
1140.250
***ΤΟ ΜΕΓΙΣΤΟ ΜΗΚΟΣ ΣΕ ΣΥΝΕΧΟΜΕΝΟ CAPRICORN ΕΙΝΑΙ ΜΕΧΡΙ ΕΝΑ ΜΕΤΡΟ*** Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
3D Printer A4988 Reprap Stepper Motor Driver Module
1116.078
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
DRV8825 Stepper Driver Module with Heatsink for Arduino
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
Arduino Nano CNC Shield V4 - Stepper Motor Driver for Arduino (GRBL Compatible)
1116.971
This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...
€7.73
χωρίς ΦΠΑ €6.23
Σε Απόθεμα
+ −
12V Fan 40x40x10mm (OEM)
1140.190
Big air flow. Low noisy. Long life. Specifications : Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 12V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm...
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega
1140.835
Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...
€7.96
χωρίς ΦΠΑ €6.42
Σε Απόθεμα
+ −
24V Fan 40x40x10mm (2pin)
1256.011
Big air flow. Low noisy. Specifications : Wire:2pin Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 24V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Bearing Type: Sleeve Cable...
€3.63
χωρίς ΦΠΑ €2.93
Μη Διαθέσιμο
L298N V3 x4 Stepper/DC Motor Driver
1215.418
This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
Genuine Einsy Rambo 1.1 by Ultimachine
1147.005
This is Einsy Rambo 1.1a. The Einsy Rambo board is an all in one 3D printer motherboard. It is a compact version of our RAMBo v1.3L design with the Arduino MEGA and stepper drivers all on one integrated PCB. A great alternative board if you need just the basics! Major Features - 4 x integrated...
€133.80
χωρίς ΦΠΑ €107.90
Σε Απόθεμα
+ −
12V Fan 90x90x25mm (OEM)
1140.191
Rated Voltage : DC 12V External Material : Plastic Main Color : Black Connector : 2 Pin Size : 90 x 90x 25mm/ 3.5" x 3.5" x 1" (L*W*H) Cable Length : 17cm/ 6.6" Weight : 62g Provides excellent air ventilation for your PC case, computer CPU fan, or other matched radiator....
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
DMA860H CNC Stepper Drive Stepping Motor Driver
1140.790
Features • Good high speed performance • Supply voltage up to 80VAC or +110VDC • Output current up to 7.2A • Self-adjusting technology • Pure-sinusoidal current control technology • Pulse input frequency up to 300 KHz • TTL compatible and optically isolated input •...
€60.46
χωρίς ΦΠΑ €48.76
Σε Απόθεμα
+ −
έκπτωση 11%
έκπτωση 11%
Brushless Cooling Fan 40mm x 40mm x 20mm 24V
1256.012
Dimensions:(40x40x20)mm Operating voltage: 24V Current: 0.8W Speed: 6000rpm
€5.05 €4.49
Κερδίζετε: €0.56 χωρίς ΦΠΑ €3.62
Σε Απόθεμα
+ −
MKS DET Outage Detection Module - Power Safety (Connects to MKS TFT)
1140.005
Connection： Connect the power input (blue terminal) and UPS to 110V/220V power supply at the same time. MKS DET MKSTFT PB0 B0/PB0 GND - 3.3V + Description: 1. MKS TFT already has the fuction of continuous printing from...
€6.72
χωρίς ΦΠΑ €5.42
Σε Απόθεμα
+ −
Prototype 8x12cm PCB Double Side Bread board FR4- Διάτρητη Πλάκέτα Διπλής Όψης
1140.142
Grid : 0.1" (2.54mm) Thickness : 1.6mm Hole diameter : 0.9mm Material : FR-4 (glass fiber) All holes are plated through Both sides are identical Size details : Size 80mm x 120mm Holes : 30 x 42
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
Original Trinamic StepStick Protector
1201.002
Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...
€9.70
χωρίς ΦΠΑ €7.82
Σε Απόθεμα
+ −
MKS-GEN L V1.0 Controller Mainboard Compatible Ramps1.4/Mega2560 R3 For 3D Printers
1215.538
1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. 2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. 3. Reserve external driver signal, available to...
€45.92
χωρίς ΦΠΑ €37.03
Σε Απόθεμα
+ −
έκπτωση 24%
έκπτωση 24%
VNH2SP30 30A Stepper Motor Driver module for Arduino
1215.784
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and...
€11.76 €8.95
Κερδίζετε: €2.80 χωρίς ΦΠΑ €7.22
Σε Απόθεμα
+ −
5V 4010 Fan 40x40x10mm
1256.249
Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 5V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Inductive Proximity Sensor Switch - NPN NC DC6-36V M8 (LJ8A3-2-Z/AX)
1215.978
Product Name: Inductive Proximity Switch Model: LJ8A3-2-Z/AX Wire Type : DC 3 Wire (Brown ,Black, Blue) NPN; Switch Appearance Type : Cylinder Theory : Inductive Sensor; Output Type : NC(Normal Closed) Diameter of Head : 8mm; Detecting Distance : 2±10%mm Detecting...
€4.36
χωρίς ΦΠΑ €3.52
Σε Απόθεμα
+ −
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
1147.016
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
AT2100 Stepstick Stepper Motor Driver With Heat Sink
1215.685
Supply Voltage: 3.3V-5V Dissipation Power: 2.5A Operating Temperature: -40°-+85°
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
1.75mm Filament Detector (Run Out Monitor)
1140.004
Generally, the 3D printer DIY kit is not able to detect running out of filament, it will continue to print until file is completed even if the filament runs out. This always leads to incomplete printing which will be wasting your time and filament, this detection module will complete fixed...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
MK2A 300*200*3.0mm Aluminum Board PCB Heat Bed
1140.036
Dimensions: 214mm x 314mm x 3mm Material: PCB Voltage: 12V Power: 130W Heating Section: 200 x 300mm
€22.32
χωρίς ΦΠΑ €18.00
Σε Απόθεμα
+ −
ESP-12S Wireless Controller WIFI Module for MKS TFT32 v4.0 touch screen
1215.012
Size: 32*24mm Configuration: Cloud servers, Android/IOS APP Firmware Upgrade: Via SD or WEB Transfer Rate: 80~100Kbytes Operating Voltage: DC 3.3V Document Type: Gcode Protocol：TCP/IP Operating Temperature Range: -30~80 degree Language:CN/EN(Auto-ID)
€17.36
χωρίς ΦΠΑ €14.00
Σε Απόθεμα
+ −
έκπτωση 7%
έκπτωση 7%
24V Fan 40x40x10mm (3pin)
1256.010
Wire:3pin Dimensions: 40X40X10mm Rated Voltage: DC 24V Rated Current: 0.12±0.03 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Cable Length:15cm
€3.92 €3.63
Κερδίζετε: €0.29 χωρίς ΦΠΑ €2.93
Σε Απόθεμα
+ −
TL-Smoother Filter Module For 3D Printer Stepper Motor
1215.731
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
Nema 17 Short Stepper - 0.09Nm 1.8 degree OK42STH22-0804AC
1256.127
Step Angle(degrees):1.8 Holding Torque:9mn.m Current / Phase:0.8amp Power: 2.64 VDC
€12.31
χωρίς ΦΠΑ €9.93
Σε Απόθεμα
+ −
SilentStepStick Tester
1201.003
Product description With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board, e.g. on a Ramps like the photo shows. The tester is...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
MK10 Aluminum Heat Sink for Creality Ender-3/CR10
1215.665
Features: This heat sink radiator is compatible for 3D printer CR-10 Series and Ender-3. CR-10 Series include CR-10, CR-10mini, CR-10S, CR-10S4 and CR-10S5. Solid aluminum material for durable use. Light weight with high heat dissipation performance. Side lock screw hole, small size and...
€4.25
χωρίς ΦΠΑ €3.43
Σε Απόθεμα
+ −
Επόμενα 18 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ