Build it yourself

Genuine Einsy Rambo 1.1 by Ultimachine

ΚΩΔΙΚΟΣ: 1147.005

This is Einsy Rambo 1.1a. The Einsy Rambo board is an all in one 3D printer motherboard. It is a compact version of our RAMBo v1.3L design with the Arduino MEGA and stepper drivers all on one integrated PCB. A great alternative board if you need just the basics! Major Features - 4 x integrated...

BrandULTIMACHINES

€133.80

χωρίς ΦΠΑ €107.90

Σε Απόθεμα

+ −

DMA860H CNC Stepper Drive Stepping Motor Driver

ΚΩΔΙΚΟΣ: 1140.790

Features • Good high speed performance • Supply voltage up to 80VAC or +110VDC • Output current up to 7.2A • Self-adjusting technology • Pure-sinusoidal current control technology • Pulse input frequency up to 300 KHz • TTL compatible and optically isolated input •...

BrandOEM

€60.46

χωρίς ΦΠΑ €48.76

Σε Απόθεμα

+ −

MKS-GEN L V1.0 Controller Mainboard Compatible Ramps1.4/Mega2560 R3 For 3D Printers

ΚΩΔΙΚΟΣ: 1215.538

1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. 2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. 3. Reserve external driver signal, available to...

BrandOEM

€45.92

χωρίς ΦΠΑ €37.03

Σε Απόθεμα

+ −

StaticBoards Ramps 1.4 SB Premium Board

ΚΩΔΙΚΟΣ: 1200.002

RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...

BrandSTATICBOARDS

€37.20

χωρίς ΦΠΑ €30.00

Σε Απόθεμα

+ −

MK2A 300*200*3.0mm Aluminum Board PCB Heat Bed

ΚΩΔΙΚΟΣ: 1140.036

Dimensions: 214mm x 314mm x 3mm Material: PCB Voltage: 12V Power: 130W Heating Section: 200 x 300mm

BrandOEM

€22.32

χωρίς ΦΠΑ €18.00

Σε Απόθεμα

+ −

E3D V6 remote control extruder 1.75mm/0.4mm

ΚΩΔΙΚΟΣ: 1256.621

E3D V6 remote control extruder 1.75mm/0.4mm Compare to E3D V5, E3D V6 has following advantages. 1. E3D V6 shortens the length, thickness and diameter heatsinks and add more heatsinks , which is good to improvestability of hotend better cooling. 2. It reduces the friction to...

BrandOEM

€18.60

χωρίς ΦΠΑ €15.00

Σε Απόθεμα

+ −

ESP-12S Wireless Controller WIFI Module for MKS TFT32 v4.0 touch screen

ΚΩΔΙΚΟΣ: 1215.012

Size: 32*24mm Configuration: Cloud servers, Android/IOS APP Firmware Upgrade: Via SD or WEB Transfer Rate: 80~100Kbytes Operating Voltage: DC 3.3V Document Type: Gcode Protocol：TCP/IP Operating Temperature Range: -30~80 degree Language:CN/EN(Auto-ID)

BrandOEM

€17.36

χωρίς ΦΠΑ €14.00

Σε Απόθεμα

+ −

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm

ΚΩΔΙΚΟΣ: 1134.122

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.26

χωρίς ΦΠΑ €13.92

Μη Διαθέσιμο

TMC2208 Stepper Motor Driver

ΚΩΔΙΚΟΣ: 1215.411

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...

BrandOEM

€14.56

χωρίς ΦΠΑ €11.74

Σε Απόθεμα

+ −

2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320

ΚΩΔΙΚΟΣ: 1147.016

2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320

BrandMISUMI

€13.64

χωρίς ΦΠΑ €11.00

Σε Απόθεμα

+ −

L298N V3 x4 Stepper/DC Motor Driver

ΚΩΔΙΚΟΣ: 1215.418

This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...

BrandOEM

€13.43

χωρίς ΦΠΑ €10.83

Σε Απόθεμα

+ −

Original E3D v6 Heat Break 3.00mm (Throat)

ΚΩΔΙΚΟΣ: 1134.121

This is a replacement HeatBreak for E3D-v6 3.00mm HotEnds.

BrandE3D

€12.40

χωρίς ΦΠΑ €10.00

Σε Απόθεμα

+ −

Nema 17 Short Stepper - 0.09Nm 1.8 degree OK42STH22-0804AC

ΚΩΔΙΚΟΣ: 1256.127

Step Angle(degrees):1.8 Holding Torque:9mn.m Current / Phase:0.8amp Power: 2.64 VDC

BrandOEM

€12.31

χωρίς ΦΠΑ €9.93

Σε Απόθεμα

+ −

TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller

ΚΩΔΙΚΟΣ: 1116.340

Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...

BrandOEM

€11.20

χωρίς ΦΠΑ €9.03

Σε Απόθεμα

+ −

AT2100 Stepstick Stepper Motor Driver With Heat Sink

ΚΩΔΙΚΟΣ: 1215.685

Supply Voltage: 3.3V-5V Dissipation Power: 2.5A Operating Temperature: -40°-+85°

BrandOEM

€11.20

χωρίς ΦΠΑ €9.03

Σε Απόθεμα

+ −

Original Trinamic StepStick Protector

ΚΩΔΙΚΟΣ: 1201.002

Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...

BrandTRINAMIC

€9.70

χωρίς ΦΠΑ €7.82

Σε Απόθεμα

+ −

3D Printer Parts Filament Welder Connector For Filament 1.75mm

ΚΩΔΙΚΟΣ: 1116.332

Size: 1.75MM Color: black Material: Aluminum Package list 1PC * Filament Connector 1PC* Allen Key Advantage Made of metal material, high quality，innovative design, easy to use. How to use 1.Trim the two filament heads that need to be connected. 2.One end pass-through from the direction of...

BrandOEM

€9.67

χωρίς ΦΠΑ €7.80

Σε Απόθεμα

+ −

έκπτωση 24%

έκπτωση 24%

VNH2SP30 30A Stepper Motor Driver module for Arduino

ΚΩΔΙΚΟΣ: 1215.784

Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and...

BrandOEM

€11.76 €8.95

Κερδίζετε: €2.80 χωρίς ΦΠΑ €7.22

Σε Απόθεμα

+ −

1524-2GT-6 Rubber Close Loop - Timing Belt

ΚΩΔΙΚΟΣ: 1256.258

Type: Closed-Loop GT2 Pitch: 2mm Circumference (mm): 1524 Belt Height: 1.52 mm Tooth Height: 0.76mm Width: 6mm

BrandOEM

€8.73

χωρίς ΦΠΑ €7.04

Σε Απόθεμα

+ −

MKS TMC2209 Stepper Motor Driver

ΚΩΔΙΚΟΣ: 1256.230

Features: Ultra quiet Large heat sink,good heat dissipation Support sensorless-homing function. Support uart mode by set jumper caps instead of welding on mks gen L V2.0,skr1.3/1.4,mks sgen L. Parameter: Default current:0.88a Recommend current:1.72a(at most) Max current:2a...

BrandOEM

€8.41

χωρίς ΦΠΑ €6.78

Σε Απόθεμα

+ −

RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega

ΚΩΔΙΚΟΣ: 1140.835

Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...

BrandOEM

€7.96

χωρίς ΦΠΑ €6.42

Σε Απόθεμα

+ −

Arduino Nano CNC Shield V4 - Stepper Motor Driver for Arduino (GRBL Compatible)

ΚΩΔΙΚΟΣ: 1116.971

This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...

BrandOEM

€7.73

χωρίς ΦΠΑ €6.23

Σε Απόθεμα

+ −

1.75mm Filament Detector (Run Out Monitor)

ΚΩΔΙΚΟΣ: 1140.004

Generally, the 3D printer DIY kit is not able to detect running out of filament, it will continue to print until file is completed even if the filament runs out. This always leads to incomplete printing which will be wasting your time and filament, this detection module will complete fixed...

BrandOEM