ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
64
1Kg eSun Black PLA+ 1.75mm
1212.006
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
StaticBoards Ramps 1.4 SB Premium Board
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
10cm Original Capricorn PTFE (Teflon) 1.9x4mm
1140.250
***ΤΟ ΜΕΓΙΣΤΟ ΜΗΚΟΣ ΣΕ ΣΥΝΕΧΟΜΕΝΟ CAPRICORN ΕΙΝΑΙ ΜΕΧΡΙ ΕΝΑ ΜΕΤΡΟ*** Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
3D Printer A4988 Reprap Stepper Motor Driver Module
1116.078
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
1Kg eSun White PLA+ 1.75mm
1212.014
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
DRV8825 Stepper Driver Module with Heatsink for Arduino
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Original E3D V6 Silicone Sock
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
1Kg eSun Cold White PLA+ 1.75mm
1212.036
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
1Kg eSun Solid Black PETG 1.75mm
1212.020
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Arduino Nano CNC Shield V4 - Stepper Motor Driver for Arduino (GRBL Compatible)
1116.971
This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...
€7.73
χωρίς ΦΠΑ €6.23
Σε Απόθεμα
+ −
1Kg eSun Silver PLA+ 1.75mm
1212.010
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original Prusa i3 MK2/S to MK2.5 upgrade kit with Smooth double-sided PEI Steel Sheet
1145.025
We are aware of that the full upgrade from Original Prusa i3 M2/S to MK3 is a little bit pricey, so we came up with the second best option - the MK2.5 upgrade. It gives you the best features of magnetic bed with spring steel sheet, whole new extruder head with Bondtech and Noctua fans goodness...
€99.20
χωρίς ΦΠΑ €80.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€86.80
χωρίς ΦΠΑ €70.00
Μη Διαθέσιμο
1Kg eSun Fire Engine Red PLA+ 1.75mm
1212.045
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun Gold PLA+ 1.75mm
1212.011
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
1Kg eSun Black eTPU 95A 1.75mm
1212.069
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with...
€36.90
χωρίς ΦΠΑ €29.76
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm
1134.034
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
1Kg eSun Grey PLA+ 1.75mm
1212.008
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun Blue PLA+ 1.75mm
1212.013
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Prusa i3 MK3 Multi Material 2.0S (MMU2S) upgrade kit (Black Printed Parts)
1145.075
Multi Material Upgrade 2S (MMU2S) is a brand new an improved version of the Multi Material Upgrade 2.0. With an easier calibration process, new filament sensor and a standalone filament buffer, the MMU2S is more reliable than ever before . WITH THE ORIGINAL PRUSA MMU2S WE ARE...
€349.00
χωρίς ΦΠΑ €281.45
Σε Απόθεμα
+ −
1Kg eSun Solid White PETG 1.75mm
1212.019
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original E3D Thermistor Cartridge
1134.019
3D Printer Thermistor Cartridge | E3D Online | E3D Online A custom made thermistor encapsulated into an easy to use cartridge package. Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs...
€9.99
χωρίς ΦΠΑ €8.06
Μη Διαθέσιμο
1Kg eSun Purple PLA+ 1.75mm
1212.012
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Prusa MK3 Filament Sensor
1145.013
Optical filament sensor for the Original Prusa i3 MK3.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original Prusa Heatbreak by E3D (MK3/S/+, MK2.5/S, MMU2S)
1145.022
This product includes: Hotend heatbreak E3D (1 pcs) Thermal paste (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Custom heatbreak made together with E3D for the Original Prusa i3 MK3 and Multi-material upgrades.
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original Prusa Print Fan 5015 (MK3/S/+, MINI/+)
1145.005
This product includes: Print fan (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€10.90
χωρίς ΦΠΑ €8.79
Μη Διαθέσιμο
1Kg eSun Green PLA+ 1.75mm
1212.007
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.002
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
12V Fan 40x40x10mm (OEM)
1140.190
Big air flow. Low noisy. Long life. Specifications : Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 12V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm...
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Original Prusa Spring Steel Sheet With Smooth Double-sided PEI
1145.043
Uses the same PEI sheets as on the MK2/S. You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect the functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can...
€69.90
χωρίς ΦΠΑ €56.37
Σε Απόθεμα
+ −
1Kg eSun eSilk Rainbow PLA 1.75mm
1212.082
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega
1140.835
Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...
€7.96
χωρίς ΦΠΑ €6.42
Σε Απόθεμα
+ −
1Kg eSun Black ABS+ 1.75mm
1212.051
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Μη Διαθέσιμο
1Kg eSun Bone White PLA+ 1.75mm
1212.048
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.40mm
1134.056
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....
€152.89
χωρίς ΦΠΑ €123.30
Σε Απόθεμα
+ −
1Kg eSun Yellow PLA+ 1.75mm
1212.015
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
1Kg eSun Orange PLA+ 1.75mm
1212.009
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 1.75mm (Throat)
1134.027
This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...
€21.70
χωρίς ΦΠΑ €17.50
Σε Απόθεμα
+ −
Original Prusa Hotend Thermistor (MK3/S/+, MK2.5/S, MK2/S)
1145.012
This product includes: Hotend thermistor E3D (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Hotend thermistor for the Original Prusa i3 MK3.
€13.00
χωρίς ΦΠΑ €10.48
Μη Διαθέσιμο
Original Bondtech Direct Drive System for Creality CR10s/S4/S5
1143.024
>> How to Install << Bondtech's Direct Drive System (DDS) for CR-10S is designed to give the user more options - different materials; higher flow and/or wider nozzles; thinner layers - and achieve a higher print quality. The DDS includes an integrated BMG (Bondtech Mini Geared)...
€124.00
χωρίς ΦΠΑ €100.00
Σε Απόθεμα
+ −
1Kg eSun Grey PETG 1.75mm
1212.063
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 40W
1134.051
24v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a metre of sillicone...
€9.18
χωρίς ΦΠΑ €7.40
Σε Απόθεμα
+ −
1Kg eSun Red PLA+ 1.75mm
1212.037
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
έκπτωση 24%
έκπτωση 24%
Original Prusa MK3/S/+ E3D 40W 24V Heater Cartridge
1145.044
This product includes: Hotend heater cartridge E3D 24V 40W (1 pcs) Specifications: Voltage: 24V Wattage: 40W To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 E3D 40W 24V Heater...
€13.00 €9.90
Κερδίζετε: €3.10 χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
24V Fan 40x40x10mm (2pin)
1256.011
Big air flow. Low noisy. Specifications : Wire:2pin Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 24V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Bearing Type: Sleeve Cable...
€3.63
χωρίς ΦΠΑ €2.93
Μη Διαθέσιμο
L298N V3 x4 Stepper/DC Motor Driver
1215.418
This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
1Kg eSun Natural PLA 1.75mm
1212.016
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - extracted and purified from corn grain; - high rigidity, good glossiness and transparency; - suitable for printing larger models; - toughness is 2 times more than the PLA on the market; - no...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Bondtech Drivegear kit 1.75mm / 5mm shaft
1143.001
Prusa i3 MK2/S Printable Extruder Parts for Bondtech Drivegear kit https://www.thingiverse.com/thing:2683976 You will need the following parts: 1 x Bondtech Direct Gearset 1 x M3 thread bushing 1 x Thumbscrew assembly (Screw, spring, washer) 1 x Pin 3×20 mm M3 screws Bondtech DualDrive...
€56.90
χωρίς ΦΠΑ €45.89
Σε Απόθεμα
+ −
Original E3D Thermal Compound Paste
1134.067
€1.90
χωρίς ΦΠΑ €1.53
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
1Kg eSun Light Blue PLA+ 1.75mm
1212.040
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
0.5Kg eSun Wood PLA 1.75mm
1212.022
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - 1. High quality wood texture - 2. Non toxic and no smelling - 3. No heated bed necessary, sticks well to print bed - 4. Low processing temperature(about 190℃) - 5. Low shrinkage and good toughness
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
2x United Chemi-Con APXG160ARA221MF80G Capacitor for Creality Faulty Tempratures Readings
1161.001
CR-10S V2.0/V2.1 C4 Replacement Capacitor – 2 Pack Replacement SMD Capacitor for C4 Capacitor on the CR-10S V2.0/V2.1 Boards Information on replacement here (DIY Guide Link on page): CR-10S V2.0/V2.1 Temperature Repair Guaranteed to fix the temperature fluctuation issue Exact...
€1.24
χωρίς ΦΠΑ €1.00
Σε Απόθεμα
+ −
1Kg eSun ePA & Carbon Fiber 1.75mm
1212.031
Features: eSUN ePA-CF Carbon Fiber Filled Nylon Filament, Used in Structural Parts, Tough Parts. 1KG Net (approximately 2.2lbs) Filament with Clear Spool. eSUN ePA-CF 3D Printer Filament Vacuumed Sealed with Desiccant. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended...
€63.00
χωρίς ΦΠΑ €50.81
Μη Διαθέσιμο
Original E3D Nozzle X V6-1.75mm-0.40mm
1134.102
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which...
€47.90
χωρίς ΦΠΑ €38.63
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Black Zaribo 320 Extrusion Kit by Misumi
1147.007
ll parts are factory cut and drilled with precision by Misumi engineers. Package content: X-Y Axis 2 HFSB-3030-354-Z8-XA12-XB342 x-axis 2 HFSB-3030-320-TPW-Z8-XA100 y-axis Z Axis 2 HFSB-3030-430-TPW Black 3030 Normal Rigidity...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Original Prusa MK2s/MK3 U-Bolts
1145.008
3 U-bolts for holding the LM8UUs on the MK2S Y-carriage. M3 nuts are included.
€9.99
χωρίς ΦΠΑ €8.06
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 12V 30W
1134.017
3D Printer Ceramic Heater Cartridge - 12v - 30w | E3D Online | E3D Online 12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original Prusa i3 MK2/s & MK3 Y-Axis Belt
1145.045
Y Axis belt for Original Prusa i3 MK2/S and MK3.
€6.60
χωρίς ΦΠΑ €5.32
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 30W
1134.018
3D Printer Ceramic Heater Cartridge - 24v - 30w | E3D Online | E3D Online 24v 30w Ceramic Heater Cartridge Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. These 30w heaters provide a fantastic balance of being...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Επόμενα 64 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ