ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Αλφαβητικά - Ω ως Α
64
Zaribo PSU Cables
1147.036
Crimped cables for connecting the PSU to the Einsy / Rambo board. Suited for MK2 / MK2.5 / MK3. Cable length incl. connectors 60cm. Packages has 2 sets (black and red) of cables.
€7.44
χωρίς ΦΠΑ €6.00
Σε Απόθεμα
+ −
Zaribo MMU2/s Stepper Motors
1147.039
Zaribo MMU2/s Stepper Motors Complete motor kit for MMU2. 3 motors.
€70.68
χωρίς ΦΠΑ €57.00
Σε Απόθεμα
+ −
Zaribo Extruder Motor Nema17 1.8° by LDO
1147.037
New motor design. Motors stay cooler during printing.
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Red
1206.002
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€53.32
χωρίς ΦΠΑ €43.00
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Orange
1206.005
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€53.32
χωρίς ΦΠΑ €43.00
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Black
1206.001
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€50.84
χωρίς ΦΠΑ €41.00
Σε Απόθεμα
+ −
έκπτωση 24%
έκπτωση 24%
VNH2SP30 30A Stepper Motor Driver module for Arduino
1215.784
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and...
€11.76 €8.95
Κερδίζετε: €2.80 χωρίς ΦΠΑ €7.22
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
TL-Smoother Filter Module For 3D Printer Stepper Motor
1215.731
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
SUNON MF40201VX-1000U-G99 12V 40x40x20 Fan
1021.447
SPECIFICATION Manufacturer SUNON Type of fan DC Kind of fan axial Operating voltage 4.5...13.8V Fan dimensions 40x40x20mm Power...
€6.94
χωρίς ΦΠΑ €5.60
Μη Διαθέσιμο
SUNON EE40101S1-1000U-999 12V 40x40x10 Fan
1021.446
SPECIFICATION Manufacturer SUNON Type of fan DC Kind of fan axial Operating voltage 4.5...13.8V Fan dimensions 40x40x10mm Power...
€3.60
χωρίς ΦΠΑ €2.90
Μη Διαθέσιμο
StaticBoards Ramps 1.4 SB Premium Board
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10/S - 220V / 750W - With Controller
1140.711
Material: Synthetic Fiber Size:309 mm X 309mm Power:750 W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm Accessories: NTC 100K Thermistor+ 1m extension wire Other: 24 pre-made screw holes of dia 12mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10 S4 - 220V / 1000W - Without Controller & Thermistor
1140.712
Material: Synthetic Fiber Size:409 mm X 409mm Power: 1000W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10 S4 - 220V / 1000W - With Controller
1140.710
Material: Synthetic Fiber Size:409 mm X 409mm Power: 1000W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm Accessories: NTC 100K Thermistor+ 1m extension wire Other: 24 pre-made screw holes of dia 12mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
SilentStepStick Tester
1201.003
Product description With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board, e.g. on a Ramps like the photo shows. The tester is...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Round Head Hex Black M5 Screws M5*35mm
1256.637
Round Head Hex Black M5 Screws M5*35mm
€0.26
χωρίς ΦΠΑ €0.21
Σε Απόθεμα
+ −
RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega
1140.835
Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...
€7.96
χωρίς ΦΠΑ €6.42
Σε Απόθεμα
+ −
Prusament 1.75mm PLA Galaxy Purple 1kg
1145.103
ABOUT PLA PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Prusament 1.75mm PETG Terracotta 1kg
1145.133
ABOUT PETG PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our printers! PETG...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Prusament 1.75mm PETG Pistachio 1kg
1145.132
ABOUT PETG PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Prototype 8x12cm PCB Double Side Bread board FR4- Διάτρητη Πλάκέτα Διπλής Όψης
1140.142
Grid : 0.1" (2.54mm) Thickness : 1.6mm Hole diameter : 0.9mm Material : FR-4 (glass fiber) All holes are plated through Both sides are identical Size details : Size 80mm x 120mm Holes : 30 x 42
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
PrimaCreator MK8 Hardened Steel Nozzle 0,8 mm for Ender-3 / CR-10
1142.024
MK8 nozzle made from hardened steel. 0,8 mm Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like...
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
PrimaCreator MK8 Hardened Steel Nozzle 0,2 mm for Ender-3 / CR-10
1142.022
MK8 nozzle made from hardened steel. 0,2 mm Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like...
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
PrimaCreator FlexPlate Powder Coated PEI 410x410mm - Fits(CR-10-S4, Raptor, T-Rex, gCreate, gMax)
1142.036
Fits: Creality CR-10S4, German RepRap X400, FORMBOT Raptor, T-REX and 2+ , Vivedino T-Rex 3.0 and Raptor 2, gCreate gMax. The new Powder Coated FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and...
€89.90
χωρίς ΦΠΑ €72.50
Σε Απόθεμα
+ −
PrimaCreator FlexPlate PEI 510x510mm - Fits CR-10-S5
1142.028
Fits: Creality CR-10 S5. The new FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the high quality spring steel sheet that is covered with a sheet of the best PEI Ultem . The...
€119.90
χωρίς ΦΠΑ €96.69
Σε Απόθεμα
+ −
PrimaCreator FlexPlate PEI 410x410mm - Fits(CR-10-S4, Raptor, T-Rex, gCreate, gMax)
1142.031
Fits: Creality CR-10S4, German RepRap X400, FORMBOT Raptor, T-REX and 2+ , Vivedino T-Rex 3.0 and Raptor 2, gCreate gMax. The new FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the...
€89.90
χωρίς ΦΠΑ €72.50
Σε Απόθεμα
+ −
Original Trinamic StepStick Protector
1201.002
Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...
€9.70
χωρίς ΦΠΑ €7.82
Σε Απόθεμα
+ −
Original Prusa Timing pulley T16-2GT (MK3/S/+, MK2.5/S, MΚ2/S, MINI/+)
1145.002
This product includes: Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 GT2-16 Pulley
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
Original Prusa Tension spring MK2/s/MK3/MMU
1145.069
Original Prusa Tension spring MK2/s/MK3/MMU
€3.72
χωρίς ΦΠΑ €3.00
Σε Απόθεμα
+ −
Original Prusa SuperPINDA (MK2.5/S, MK3/S/+, MINI/+)
1145.140
SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). When replacing the original probe with SuperPINDA make sure to use the 3.9.2 or higher firmware version. SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor. Making...
€34.89
χωρίς ΦΠΑ €28.14
Μη Διαθέσιμο
Original Prusa Spring Steel Sheet With Smooth Double-sided PEI
1145.043
Uses the same PEI sheets as on the MK2/S. You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect the functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can...
€69.90
χωρίς ΦΠΑ €56.37
Σε Απόθεμα
+ −
Original Prusa Signal cable MK3/MK2.5 MMU2/s
1145.078
Spare part for the MMU2 upgrade.
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original Prusa Selector front plate black MMU2
1145.081
An extra plastic part for your 3D printer, make sure you are ordering the correct part and color. Part name on GitHub: mmu2-selector-front-plate
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original Prusa RAMBo Mini Heatbed Connector
1145.009
RAMBO mini Heatbed Connector
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Original Prusa PTFE - MMU2 - ptfe holder
1145.070
This PTFE tube is for PTFE HOLDER compatible with Original Prusa i3 MK3/MK2.5 MMU2. You need 5 tubes for the printer. More about PTFE tubes can be found in this article. Compatible printers: This PTFE tube is for PTFE HOLDER Original Prusa i3 MK3 MMU2 Original Prusa i3 MK2.5...
€0.99
χωρίς ΦΠΑ €0.80
Σε Απόθεμα
+ −
Original Prusa PTFE - MMU2 - extruder to MMU2 unit
1145.071
This PTFE tube is for the extruder to MMU2 unit connection compatible with Original Prusa i3 MK3/MK2.5 MMU2. You need one tube for the printer. More about PTFE tubes can be found in this article. Compatible printers: This PTFE tube is for the extruder to MMU2 unit connection....
€2.48
χωρίς ΦΠΑ €2.00
Μη Διαθέσιμο
Original Prusa PSU for MK2/MK2S printer
1145.038
PSU supplied with MK2/MK2S printer, universal, switcheable, 12V
€49.60
χωρίς ΦΠΑ €40.00
Σε Απόθεμα
+ −
Original Prusa Print Fan 5015 (MK3/S/+, MINI/+)
1145.005
This product includes: Print fan (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€10.90
χωρίς ΦΠΑ €8.79
Μη Διαθέσιμο
Original Prusa Power cable for MK3 MMU2/s
1145.077
Spare part for the MMU2 upgrade. ATTENTION!!! This power cable is compatible only with the MK3 printer!
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
έκπτωση 10%
έκπτωση 10%
Original Prusa Nozzle Cooling Fan 5V (MK3/S/+, MK2.5/S)
1145.010
This product is the replacement Hotend fan. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly. This product includes: Hotend fan (1 pcs) Fasteners Product photo is...
€18.90 €17.00
Κερδίζετε: €1.90 χωρίς ΦΠΑ €13.71
Σε Απόθεμα
+ −
Original Prusa New Black MK3/S/+ PSU 24V 240W (PSU Only)
1145.090
This product includes: Power supply unit 24V 240W (1 pcs) Specifications: Voltage: 24V Wattage: 240W Current (MAX): 10A Fuse: F8AH250V To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€115.00
χωρίς ΦΠΑ €92.74
Σε Απόθεμα
+ −
Original Prusa MK3S+ Fasteners (spare bag)
1145.142
This product includes: Nuts: M3nS (4x); M3n (4x); M3nN (4x) Screws: M2x8 (2); M3x10 (4x); M3x12b (4x); M3x14 (2x); M3x18 (4x); M3x20 (2x); M3x30 (2x); M3x40 (4x); M5x16r (4x); M4x10r (4x) Other: PTFE tube 4x1,85x42,3 (2x); Steel ball (1x); Magnet 20x6x2 (1x); Magnet 10x6x2 (1x)...
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
έκπτωση 13%
έκπτωση 13%
Original Prusa MK3/S/+ Heatbed Thermistor
1145.011
Heatbed thermistor for the Original Prusa i3 MK3.
€9.99 €8.70
Κερδίζετε: €1.29 χωρίς ΦΠΑ €7.02
Σε Απόθεμα
+ −
έκπτωση 24%
έκπτωση 24%
Original Prusa MK3/S/+ E3D 40W 24V Heater Cartridge
1145.044
This product includes: Hotend heater cartridge E3D 24V 40W (1 pcs) Specifications: Voltage: 24V Wattage: 40W To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 E3D 40W 24V Heater...
€13.00 €9.90
Κερδίζετε: €3.10 χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
Original Prusa MK3/S/+ Antivibration Feet (1pcs)
1145.098
This product includes: Antivibration foot (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Antivibration feet, 1pcs for MK3/S
€1.80
χωρίς ΦΠΑ €1.45
Σε Απόθεμα
+ −
Original Prusa MK3 Filament Sensor Cable
1145.068
Original Prusa MK3 Filament Sensor Cable
€4.71
χωρίς ΦΠΑ €3.80
Σε Απόθεμα
+ −
Original Prusa MK3 Filament Sensor
1145.013
Optical filament sensor for the Original Prusa i3 MK3.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original Prusa MK2s/MK3 U-Bolts
1145.008
3 U-bolts for holding the LM8UUs on the MK2S Y-carriage. M3 nuts are included.
€9.99
χωρίς ΦΠΑ €8.06
Σε Απόθεμα
+ −
Original Prusa MINI Spring Steel Sheet With Smooth Double-sided PEI
1145.123
This product includes: Double-sided Textured PEI Powder-coated Spring Steel Sheet (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model. Note: Consumable parts, such as PEI sheets (smooth, textured, etc.)...
€34.91
χωρίς ΦΠΑ €28.15
Μη Διαθέσιμο
Original Prusa MINI PTFE Fitting
1145.128
This product includes: PTFE Fitting MINI (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Original Prusa MINI PSU
1145.127
This product includes: Power supply unit (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€80.60
χωρίς ΦΠΑ €65.00
Σε Απόθεμα
+ −
Original Prusa MINI MINDA probe (set)
1145.125
This product is the replacement M.I.N.D.A. probe set for the Original Prusa MINI. This product includes: MINDA probe (1 pcs) MINI FAN SPACER CLIP (1 pcs) MINI FAN SPACER (1 pcs) MINI MINDA HOLDER (1 pcs) Screws: M3x20 (1 pcs) Zip-tie 2,5x160 (5 pcs) To replace the part/s,...
€23.89
χωρίς ΦΠΑ €19.27
Σε Απόθεμα
+ −
Original Prusa Mini M.I.N.D.A. Probe
1145.113
This product includes: M.I.N.D.A. probe (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€17.51
χωρίς ΦΠΑ €14.12
Σε Απόθεμα
+ −
Original Prusa Mini Linear bearing LM10UU
1145.118
MORE INFO This product includes: Linear bearing LM10UU (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€5.70
χωρίς ΦΠΑ €4.60
Σε Απόθεμα
+ −
Original Prusa Mini Hotend Heaterblock
1145.115
MORE INFO This product includes: Heaterblock MINI (1 pcs) Screws: M3x4 (1 pcs), M3x10r (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€17.51
χωρίς ΦΠΑ €14.12
Μη Διαθέσιμο
Original Prusa MINI Hotend Fan
1145.129
This product includes: Hotend fan MINI (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€13.50
χωρίς ΦΠΑ €10.89
Σε Απόθεμα
+ −
Original Prusa Mini Filament sensor (Assembled)
1145.117
MORE INFO This product includes: IR filament sensor 1 (pcs) IR filament sensor-Buddy board cable (1 pcs) Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs) PTFE tube (1 pcs) MINI FSENSOR BOX (1 pcs) MINI FSENSOR COVER (1 pcs) MINI FSENSOR LEVER (1...
€28.69
χωρίς ΦΠΑ €23.14
Σε Απόθεμα
+ −
Original Prusa Mini Extruder-Print head PTFE tube
1145.116
This product includes: Extruder-Print head PTFE tube (MINI) (1 pcs) Swivel nut (2 pcs) Pressed olive part (2 pcs) Specifications: Length: 275 mm Inner diameter: 2 mm Outer diameter: 4 mm To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for...
€3.70
χωρίς ΦΠΑ €2.98
Σε Απόθεμα
+ −
Original Prusa Mini Double-sided Textured PEI Powder-coated Spring Steel Sheet
1145.114
MORE INFO This product includes: Spring Steel Sheet With Smooth Double-sided PEI (1 pcs) PEI-Ultem sheet (already mounted and fixed in place on the steel sheet) (2 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model....
€43.00
χωρίς ΦΠΑ €34.68
Σε Απόθεμα
+ −
Original Prusa MINI Buddy Control Board
1145.130
This product includes: Buddy control board (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€135.00
χωρίς ΦΠΑ €108.87
Σε Απόθεμα
+ −
Original Prusa Mini Belt Y-axis
1145.120
This product includes: Belt Y-axis (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€5.51
χωρίς ΦΠΑ €4.44
Μη Διαθέσιμο
Original Prusa Mini Belt X-axis
1145.121
This product includes: Belt X-axis (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€5.51
χωρίς ΦΠΑ €4.44
Σε Απόθεμα
+ −
Επόμενα 64 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ