ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Αλφαβητικά - Ω ως Α
128
Zaribo PSU Cables
1147.036
Crimped cables for connecting the PSU to the Einsy / Rambo board. Suited for MK2 / MK2.5 / MK3. Cable length incl. connectors 60cm. Packages has 2 sets (black and red) of cables.
€7.44
χωρίς ΦΠΑ €6.00
Σε Απόθεμα
+ −
Zaribo MMU2/s Stepper Motors
1147.039
Zaribo MMU2/s Stepper Motors Complete motor kit for MMU2. 3 motors.
€70.68
χωρίς ΦΠΑ €57.00
Σε Απόθεμα
+ −
Zaribo Extruder Motor Nema17 1.8° by LDO
1147.037
New motor design. Motors stay cooler during printing.
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Red
1206.002
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€53.32
χωρίς ΦΠΑ €43.00
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Orange
1206.005
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€53.32
χωρίς ΦΠΑ €43.00
Σε Απόθεμα
+ −
Wanhao UV Resin 1000ml Black
1206.001
Wavelength 405NM Time for solidify 8 - 16s Viscosity (25 degree) 120~140 mPa.s Density (25 degree) 1.12g/cm3 Format 250g / 500g / 1000 g 或 1 liter Curing depth 0.1mm Storage temperature 8~28 degree Shelf...
€50.84
χωρίς ΦΠΑ €41.00
Σε Απόθεμα
+ −
έκπτωση 24%
έκπτωση 24%
VNH2SP30 30A Stepper Motor Driver module for Arduino
1215.784
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and...
€11.76 €8.95
Κερδίζετε: €2.80 χωρίς ΦΠΑ €7.22
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
TL-Smoother Filter Module For 3D Printer Stepper Motor
1215.731
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
SUNON MF40201VX-1000U-G99 12V 40x40x20 Fan
1021.447
SPECIFICATION Manufacturer SUNON Type of fan DC Kind of fan axial Operating voltage 4.5...13.8V Fan dimensions 40x40x20mm Power...
€6.94
χωρίς ΦΠΑ €5.60
Μη Διαθέσιμο
SUNON EE40101S1-1000U-999 12V 40x40x10 Fan
1021.446
SPECIFICATION Manufacturer SUNON Type of fan DC Kind of fan axial Operating voltage 4.5...13.8V Fan dimensions 40x40x10mm Power...
€3.60
χωρίς ΦΠΑ €2.90
Μη Διαθέσιμο
StaticBoards Ramps 1.4 SB Premium Board
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10/S - 220V / 750W - With Controller
1140.711
Material: Synthetic Fiber Size:309 mm X 309mm Power:750 W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm Accessories: NTC 100K Thermistor+ 1m extension wire Other: 24 pre-made screw holes of dia 12mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10 S4 - 220V / 1000W - Without Controller & Thermistor
1140.712
Material: Synthetic Fiber Size:409 mm X 409mm Power: 1000W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Silicon Heater for Creality CR-10 S4 - 220V / 1000W - With Controller
1140.710
Material: Synthetic Fiber Size:409 mm X 409mm Power: 1000W (in profiled heating circuit) Mounting Method: 3M adhesive backing Leads: 1000mm Accessories: NTC 100K Thermistor+ 1m extension wire Other: 24 pre-made screw holes of dia 12mm
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
SilentStepStick Tester
1201.003
Product description With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board, e.g. on a Ramps like the photo shows. The tester is...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Round Head Hex Black M5 Screws M5*35mm
1256.637
Round Head Hex Black M5 Screws M5*35mm
€0.26
χωρίς ΦΠΑ €0.21
Σε Απόθεμα
+ −
RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega
1140.835
Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...
€7.96
χωρίς ΦΠΑ €6.42
Σε Απόθεμα
+ −
Prusament 1.75mm PLA Galaxy Purple 1kg
1145.103
ABOUT PLA PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Prusament 1.75mm PETG Terracotta 1kg
1145.133
ABOUT PETG PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our printers! PETG...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Prusament 1.75mm PETG Pistachio 1kg
1145.132
ABOUT PETG PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our...
€39.89
χωρίς ΦΠΑ €32.17
Σε Απόθεμα
+ −
Prototype 8x12cm PCB Double Side Bread board FR4- Διάτρητη Πλάκέτα Διπλής Όψης
1140.142
Grid : 0.1" (2.54mm) Thickness : 1.6mm Hole diameter : 0.9mm Material : FR-4 (glass fiber) All holes are plated through Both sides are identical Size details : Size 80mm x 120mm Holes : 30 x 42
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
PrimaCreator MK8 Hardened Steel Nozzle 0,8 mm for Ender-3 / CR-10
1142.024
MK8 nozzle made from hardened steel. 0,8 mm Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like...
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
PrimaCreator MK8 Hardened Steel Nozzle 0,2 mm for Ender-3 / CR-10
1142.022
MK8 nozzle made from hardened steel. 0,2 mm Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like...
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
PrimaCreator FlexPlate Powder Coated PEI 410x410mm - Fits(CR-10-S4, Raptor, T-Rex, gCreate, gMax)
1142.036
Fits: Creality CR-10S4, German RepRap X400, FORMBOT Raptor, T-REX and 2+ , Vivedino T-Rex 3.0 and Raptor 2, gCreate gMax. The new Powder Coated FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and...
€89.90
χωρίς ΦΠΑ €72.50
Σε Απόθεμα
+ −
PrimaCreator FlexPlate PEI 510x510mm - Fits CR-10-S5
1142.028
Fits: Creality CR-10 S5. The new FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the high quality spring steel sheet that is covered with a sheet of the best PEI Ultem . The...
€119.90
χωρίς ΦΠΑ €96.69
Σε Απόθεμα
+ −
PrimaCreator FlexPlate PEI 410x410mm - Fits(CR-10-S4, Raptor, T-Rex, gCreate, gMax)
1142.031
Fits: Creality CR-10S4, German RepRap X400, FORMBOT Raptor, T-REX and 2+ , Vivedino T-Rex 3.0 and Raptor 2, gCreate gMax. The new FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the...
€89.90
χωρίς ΦΠΑ €72.50
Σε Απόθεμα
+ −
Original Trinamic StepStick Protector
1201.002
Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...
€9.70
χωρίς ΦΠΑ €7.82
Σε Απόθεμα
+ −
Original Prusa Timing pulley T16-2GT (MK3/S/+, MK2.5/S, MΚ2/S, MINI/+)
1145.002
This product includes: Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 GT2-16 Pulley
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
Original Prusa Tension spring MK2/s/MK3/MMU
1145.069
Original Prusa Tension spring MK2/s/MK3/MMU
€3.72
χωρίς ΦΠΑ €3.00
Σε Απόθεμα
+ −
Original Prusa SuperPINDA (MK2.5/S, MK3/S/+, MINI/+)
1145.140
SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). When replacing the original probe with SuperPINDA make sure to use the 3.9.2 or higher firmware version. SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor. Making...
€34.89
χωρίς ΦΠΑ €28.14
Μη Διαθέσιμο
Original Prusa Spring Steel Sheet With Smooth Double-sided PEI
1145.043
Uses the same PEI sheets as on the MK2/S. You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect the functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can...
€69.90
χωρίς ΦΠΑ €56.37
Σε Απόθεμα
+ −
Original Prusa Signal cable MK3/MK2.5 MMU2/s
1145.078
Spare part for the MMU2 upgrade.
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original Prusa Selector front plate black MMU2
1145.081
An extra plastic part for your 3D printer, make sure you are ordering the correct part and color. Part name on GitHub: mmu2-selector-front-plate
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original Prusa RAMBo Mini Heatbed Connector
1145.009
RAMBO mini Heatbed Connector
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Original Prusa PTFE - MMU2 - ptfe holder
1145.070
This PTFE tube is for PTFE HOLDER compatible with Original Prusa i3 MK3/MK2.5 MMU2. You need 5 tubes for the printer. More about PTFE tubes can be found in this article. Compatible printers: This PTFE tube is for PTFE HOLDER Original Prusa i3 MK3 MMU2 Original Prusa i3 MK2.5...
€0.99
χωρίς ΦΠΑ €0.80
Σε Απόθεμα
+ −
Original Prusa PTFE - MMU2 - extruder to MMU2 unit
1145.071
This PTFE tube is for the extruder to MMU2 unit connection compatible with Original Prusa i3 MK3/MK2.5 MMU2. You need one tube for the printer. More about PTFE tubes can be found in this article. Compatible printers: This PTFE tube is for the extruder to MMU2 unit connection....
€2.48
χωρίς ΦΠΑ €2.00
Μη Διαθέσιμο
Original Prusa PSU for MK2/MK2S printer
1145.038
PSU supplied with MK2/MK2S printer, universal, switcheable, 12V
€49.60
χωρίς ΦΠΑ €40.00
Σε Απόθεμα
+ −
Original Prusa Print Fan 5015 (MK3/S/+, MINI/+)
1145.005
This product includes: Print fan (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€10.90
χωρίς ΦΠΑ €8.79
Μη Διαθέσιμο
Original Prusa Power cable for MK3 MMU2/s
1145.077
Spare part for the MMU2 upgrade. ATTENTION!!! This power cable is compatible only with the MK3 printer!
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
έκπτωση 10%
έκπτωση 10%
Original Prusa Nozzle Cooling Fan 5V (MK3/S/+, MK2.5/S)
1145.010
This product is the replacement Hotend fan. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly. This product includes: Hotend fan (1 pcs) Fasteners Product photo is...
€18.90 €17.00
Κερδίζετε: €1.90 χωρίς ΦΠΑ €13.71
Σε Απόθεμα
+ −
Original Prusa New Black MK3/S/+ PSU 24V 240W (PSU Only)
1145.090
This product includes: Power supply unit 24V 240W (1 pcs) Specifications: Voltage: 24V Wattage: 240W Current (MAX): 10A Fuse: F8AH250V To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€115.00
χωρίς ΦΠΑ €92.74
Σε Απόθεμα
+ −
Original Prusa MK3S+ Fasteners (spare bag)
1145.142
This product includes: Nuts: M3nS (4x); M3n (4x); M3nN (4x) Screws: M2x8 (2); M3x10 (4x); M3x12b (4x); M3x14 (2x); M3x18 (4x); M3x20 (2x); M3x30 (2x); M3x40 (4x); M5x16r (4x); M4x10r (4x) Other: PTFE tube 4x1,85x42,3 (2x); Steel ball (1x); Magnet 20x6x2 (1x); Magnet 10x6x2 (1x)...
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
έκπτωση 13%
έκπτωση 13%
Original Prusa MK3/S/+ Heatbed Thermistor
1145.011
Heatbed thermistor for the Original Prusa i3 MK3.
€9.99 €8.70
Κερδίζετε: €1.29 χωρίς ΦΠΑ €7.02
Σε Απόθεμα
+ −
έκπτωση 24%
έκπτωση 24%
Original Prusa MK3/S/+ E3D 40W 24V Heater Cartridge
1145.044
This product includes: Hotend heater cartridge E3D 24V 40W (1 pcs) Specifications: Voltage: 24V Wattage: 40W To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 E3D 40W 24V Heater...
€13.00 €9.90
Κερδίζετε: €3.10 χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
Original Prusa MK3/S/+ Antivibration Feet (1pcs)
1145.098
This product includes: Antivibration foot (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Antivibration feet, 1pcs for MK3/S
€1.80
χωρίς ΦΠΑ €1.45
Σε Απόθεμα
+ −
Original Prusa MK3 Filament Sensor Cable
1145.068
Original Prusa MK3 Filament Sensor Cable
€4.71
χωρίς ΦΠΑ €3.80
Σε Απόθεμα
+ −
Original Prusa MK3 Filament Sensor
1145.013
Optical filament sensor for the Original Prusa i3 MK3.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original Prusa MK2s/MK3 U-Bolts
1145.008
3 U-bolts for holding the LM8UUs on the MK2S Y-carriage. M3 nuts are included.
€9.99
χωρίς ΦΠΑ €8.06
Σε Απόθεμα
+ −
Original Prusa MINI Spring Steel Sheet With Smooth Double-sided PEI
1145.123
This product includes: Double-sided Textured PEI Powder-coated Spring Steel Sheet (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model. Note: Consumable parts, such as PEI sheets (smooth, textured, etc.)...
€34.91
χωρίς ΦΠΑ €28.15
Μη Διαθέσιμο
Original Prusa MINI PTFE Fitting
1145.128
This product includes: PTFE Fitting MINI (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Original Prusa MINI PSU
1145.127
This product includes: Power supply unit (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€80.60
χωρίς ΦΠΑ €65.00
Σε Απόθεμα
+ −
Original Prusa MINI MINDA probe (set)
1145.125
This product is the replacement M.I.N.D.A. probe set for the Original Prusa MINI. This product includes: MINDA probe (1 pcs) MINI FAN SPACER CLIP (1 pcs) MINI FAN SPACER (1 pcs) MINI MINDA HOLDER (1 pcs) Screws: M3x20 (1 pcs) Zip-tie 2,5x160 (5 pcs) To replace the part/s,...
€23.89
χωρίς ΦΠΑ €19.27
Σε Απόθεμα
+ −
Original Prusa Mini M.I.N.D.A. Probe
1145.113
This product includes: M.I.N.D.A. probe (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€17.51
χωρίς ΦΠΑ €14.12
Σε Απόθεμα
+ −
Original Prusa Mini Linear bearing LM10UU
1145.118
MORE INFO This product includes: Linear bearing LM10UU (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€5.70
χωρίς ΦΠΑ €4.60
Σε Απόθεμα
+ −
Original Prusa Mini Hotend Heaterblock
1145.115
MORE INFO This product includes: Heaterblock MINI (1 pcs) Screws: M3x4 (1 pcs), M3x10r (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€17.51
χωρίς ΦΠΑ €14.12
Μη Διαθέσιμο
Original Prusa MINI Hotend Fan
1145.129
This product includes: Hotend fan MINI (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€13.50
χωρίς ΦΠΑ €10.89
Σε Απόθεμα
+ −
Original Prusa Mini Filament sensor (Assembled)
1145.117
MORE INFO This product includes: IR filament sensor 1 (pcs) IR filament sensor-Buddy board cable (1 pcs) Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs) PTFE tube (1 pcs) MINI FSENSOR BOX (1 pcs) MINI FSENSOR COVER (1 pcs) MINI FSENSOR LEVER (1...
€28.69
χωρίς ΦΠΑ €23.14
Σε Απόθεμα
+ −
Original Prusa Mini Extruder-Print head PTFE tube
1145.116
This product includes: Extruder-Print head PTFE tube (MINI) (1 pcs) Swivel nut (2 pcs) Pressed olive part (2 pcs) Specifications: Length: 275 mm Inner diameter: 2 mm Outer diameter: 4 mm To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for...
€3.70
χωρίς ΦΠΑ €2.98
Σε Απόθεμα
+ −
Original Prusa Mini Double-sided Textured PEI Powder-coated Spring Steel Sheet
1145.114
MORE INFO This product includes: Spring Steel Sheet With Smooth Double-sided PEI (1 pcs) PEI-Ultem sheet (already mounted and fixed in place on the steel sheet) (2 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model....
€43.00
χωρίς ΦΠΑ €34.68
Σε Απόθεμα
+ −
Original Prusa MINI Buddy Control Board
1145.130
This product includes: Buddy control board (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€135.00
χωρίς ΦΠΑ €108.87
Σε Απόθεμα
+ −
Original Prusa Mini Belt Y-axis
1145.120
This product includes: Belt Y-axis (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€5.51
χωρίς ΦΠΑ €4.44
Μη Διαθέσιμο
Original Prusa Mini Belt X-axis
1145.121
This product includes: Belt X-axis (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€5.51
χωρίς ΦΠΑ €4.44
Σε Απόθεμα
+ −
Original Prusa LM8UU Bearing (for all printers)
1145.001
This product includes: Linear bearing LM8UU (1 pcs) Specifications: Length: 24 mm Outer diameter: 15 mm Inner diameter: 8 mm
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Original Prusa IR Filament sensor for MK3S/+, MK2.5S and MMU2S
1145.085
IR filament sensor (without cable)
€19.51
χωρίς ΦΠΑ €15.73
Μη Διαθέσιμο
Original Prusa i3 MK3/S to MK3S+ upgrade kit
1145.138
Original Prusa i3 MK3/S to MK3S+ upgrade kit Upgrade kit for the Original Prusa i3 MK3/S to Original Prusa i3 MK3S+. With this upgrade, we are introducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved plastic parts and u-bolts were changed to metal...
€31.00
χωρίς ΦΠΑ €25.00
Σε Απόθεμα
+ −
Original Prusa i3 MK3 Multi Material 2.0S (MMU2S) upgrade kit (Black Printed Parts)
1145.075
Multi Material Upgrade 2S (MMU2S) is a brand new an improved version of the Multi Material Upgrade 2.0. With an easier calibration process, new filament sensor and a standalone filament buffer, the MMU2S is more reliable than ever before . WITH THE ORIGINAL PRUSA MMU2S WE ARE...
€349.00
χωρίς ΦΠΑ €281.45
Σε Απόθεμα
+ −
Original Prusa i3 MK2/S to MK2.5 upgrade kit with Smooth double-sided PEI Steel Sheet
1145.025
We are aware of that the full upgrade from Original Prusa i3 M2/S to MK3 is a little bit pricey, so we came up with the second best option - the MK2.5 upgrade. It gives you the best features of magnetic bed with spring steel sheet, whole new extruder head with Bondtech and Noctua fans goodness...
€99.20
χωρίς ΦΠΑ €80.00
Μη Διαθέσιμο
Original Prusa i3 MK2/s & MK3 Y-Axis Belt
1145.045
Y Axis belt for Original Prusa i3 MK2/S and MK3.
€6.60
χωρίς ΦΠΑ €5.32
Σε Απόθεμα
+ −
Original Prusa Hotend thermistor E3D (MINI/+)
1145.147
Hotend thermistor E3D for MINI/+ This product includes: Hotend thermistor E3D (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length:   840 mm To replace the part/s, please consult our   Assembly Manuals . Make sure to follow the manual for your...
€13.00
χωρίς ΦΠΑ €10.48
Σε Απόθεμα
+ −
Original Prusa Hotend Thermistor (MK3/S/+, MK2.5/S, MK2/S)
1145.012
This product includes: Hotend thermistor E3D (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Hotend thermistor for the Original Prusa i3 MK3.
€13.00
χωρίς ΦΠΑ €10.48
Μη Διαθέσιμο
έκπτωση 40%
έκπτωση 40%
Original Prusa Hotend PTFE tube (MK3S+, MMU2S)
1145.144
This product is the replacement hotend PTFE tube. It is ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends. It is NOT compatible with the MK2.5, MK3, MK3S hotends. This product includes: Hotend PTFE tube (1 pcs) Specifications: Length: 42.3 mm (tolerance +/- 0.2...
€2.00 €1.20
Κερδίζετε: €0.79 χωρίς ΦΠΑ €0.97
Σε Απόθεμα
+ −
Original Prusa Hotend heatsink MINI
1145.119
This product is the replacement Hotend heatsink MINI. It is ONLY compatible with the Original Prusa MINI. This product includes: Hotend heatsink MINI (1 pcs) Threaded PTFE connection (1 pcs) Screws: M3x4 (3 pcs) Thermal paste (0.5g) (1 pcs) To replace the part/s, please consult our...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original Prusa Hotend heatbreak MINI/+
1145.122
This product includes: Hotend heatbreak MINI/+ (1 pcs) Thermal paste (0.5g) (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€15.90
χωρίς ΦΠΑ €12.82
Σε Απόθεμα
+ −
Original Prusa Heatbreak by E3D (MK3/S/+, MK2.5/S, MMU2S)
1145.022
This product includes: Hotend heatbreak E3D (1 pcs) Thermal paste (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Custom heatbreak made together with E3D for the Original Prusa i3 MK3 and Multi-material upgrades.
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original Prusa Heatbed-Einsy power cable (screw-attached), MK3S/MK3/MK3S+
1145.145
This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed. This product includes: Heatbed-Einsy power cable (1 pcs) To...
€7.50
χωρίς ΦΠΑ €6.05
Σε Απόθεμα
+ −
Original Prusa Heatbed-Buddy power cable (Mini/+)
1145.148
Heatbed-Buddy power cable This product includes: Heatbed-Buddy power cable (1 pcs) To replace the part/s, please consult our   Assembly Manuals . Make sure to follow the manual for your printer model.
€6.89
χωρίς ΦΠΑ €5.56
Σε Απόθεμα
+ −
Original Prusa Heatbed thermistor set (MINI/+)
1145.139
This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your...
€8.49
χωρίς ΦΠΑ €6.85
Μη Διαθέσιμο
Original Prusa Filament sensor cover black MMU2
1145.080
An extra plastic part for your 3D printer, make sure you are ordering the correct part and color. Part name on GitHub: mmu2-filament-sensor-cover
€4.98
χωρίς ΦΠΑ €4.02
Σε Απόθεμα
+ −
Original Prusa Festo Pneumatic for MMU (QSM-M5)
1145.056
Original Prusa Festo Pneumatic for MMU
€4.90
χωρίς ΦΠΑ €3.95
Σε Απόθεμα
+ −
Original Prusa F.I.N.D.A. sensor MMU2/s
1145.079
Spare part for the MMU2 upgrade.
€18.60
χωρίς ΦΠΑ €15.00
Σε Απόθεμα
+ −
Original Prusa Double-sided Powder-coated Satin Spring Steel Sheet
1145.143
OVERVIEW: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth...
€69.90
χωρίς ΦΠΑ €56.37
Σε Απόθεμα
+ −
Original Prusa Assembled hotend MINI/+
1145.146
This product is the replacement Assembled hotend for the Original Prusa MINI/+. All listed components are already assembled together. This product includes: Nozzle (Diameter: 0.4 mm) (1 pcs) Hotend heaterblock (1 pcs) Hotend heatbreak (1 pcs) Hotend heatsink (1 pcs) PTFE tube (4x2x43.4...
€98.90
χωρίς ΦΠΑ €79.76
Σε Απόθεμα
+ −
Original Prusa Assembled hotend E3D (MK3S+)
1145.141
This product includes: Nozzle V6 E3D (1 pcs) Hotend heaterblock E3D (1 pcs) Hotend heatbreak E3D (MK3/S, MK2.5/S, MMU2S) (1 pcs) Hotend heatsink E3D (1 pcs) Heatsink collet E3D (1 pcs) Hotend PTFE tube (MK3S+, MMU2S) (1 pcs) Hotend heater cartridge E3D 24V 40W (1 pcs)...
€104.90
χωρίς ΦΠΑ €84.60
Μη Διαθέσιμο
Original Prusa ABS Juice (Granule Only - Needs Acetone)
1145.036
You will need ABS Juice if you own older types of our printers. With the Original Prusa i3 MK2 / S, MK2.5 and MK3 you don't need to use ABS Juice anymore.
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....
€152.89
χωρίς ΦΠΑ €123.30
Σε Απόθεμα
+ −
Original E3D Volcano Silicone Sock
1134.011
Silicone Socks for E3D Volcano Heater Block and Nozzles These socks will keep your heater block clean and free from burnt and blackened plastic. They don’t just keep the block clean, but also keep heat inside the HotEnd and off your print. Made of a heat-resistant, non-stick silicone...
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.20mm
1134.099
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.00mm
1134.098
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.80mm
1134.097
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.60mm
1134.096
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.40mm
1134.095
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Eruption Pack 24V
1134.114
Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...
€57.04
χωρίς ΦΠΑ €46.00
Μη Διαθέσιμο
Original E3D Volcano 1.75mm Starter Pack 24V
1134.010
Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D Volcano 1.75mm Starter Pack 12V
1134.009
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D V6 Threaded Heatsink
1134.100
An alternative to Groovemount There are a couple of major flaws with groovemounting (or previous standard HotEnd mounting style): Fit is highly dependent on quality of part machining Fit can become loose from repeated removal and refitting To fight these problems, we're...
€23.00
χωρίς ΦΠΑ €18.55
Σε Απόθεμα
+ −
Original E3D V6 Silicone Sock
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm
1134.122
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm
1134.034
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.35mm
1134.033
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.24
χωρίς ΦΠΑ €13.90
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.30mm
1134.032
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.25mm
1134.031
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€74.40
χωρίς ΦΠΑ €60.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€86.80
χωρίς ΦΠΑ €70.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.002
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 3.00mm (Throat)
1134.121
This is a replacement HeatBreak for E3D-v6 3.00mm HotEnds.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 1.75mm (Throat)
1134.027
This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...
€21.70
χωρίς ΦΠΑ €17.50
Σε Απόθεμα
+ −
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.80mm
1134.063
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.60mm
1134.062
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.50mm
1134.061
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.40mm
1134.060
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.80mm
1134.059
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.60mm
1134.058
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.50mm
1134.057
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.40mm
1134.056
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.35mm
1134.055
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€11.41
χωρίς ΦΠΑ €9.20
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.30mm
1134.054
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.25mm
1134.053
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D V6 Aluminum Heater Block
1134.107
This heater block works with our New Standard thermistor sensor for V6... Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor cartridge, instead of a...
€23.89
χωρίς ΦΠΑ €19.27
Μη Διαθέσιμο
Original E3D Titan Thumb Wheel
1134.112
€5.21
χωρίς ΦΠΑ €4.20
Σε Απόθεμα
+ −
Original E3D Titan Replacement Kit - Bearings & Lid
1134.046
This kit contains the new Tritan Titan lid & two new bearings suitable for Titan and Titan Aero. Previous to February 2018, Titan lids were made of polycarbonate and occasional failure was occuring due to the the chemical composition of bearing lubricant. The solution to this is now...
€5.08
χωρίς ΦΠΑ €4.10
Μη Διαθέσιμο
Original E3D Titan Extruder Hobb (Stainless Steel)
1134.111
A replacement stainless steel extruder hobb for the Titan and Titan Aero.
€38.19
χωρίς ΦΠΑ €30.80
Σε Απόθεμα
+ −
Original E3D Thermistor Cartridge
1134.019
3D Printer Thermistor Cartridge | E3D Online | E3D Online A custom made thermistor encapsulated into an easy to use cartridge package. Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs...
€9.99
χωρίς ΦΠΑ €8.06
Μη Διαθέσιμο
Original E3D Thermal Compound Paste
1134.067
€1.90
χωρίς ΦΠΑ €1.53
Μη Διαθέσιμο
Original E3D SuperVolcano Upgrade Kit (Eruption pack)
1134.108
Eruption Pack 1 x Plated Copper SuperVolcano Heater Block 1 x Thermistor 1 x Thermistor Extension Cable 1 x Silicone Glass Fibre Sleeving 1 x 80W Heater Cartridge 1 x Brass 0.8mm, 1mm, 1.2mm and 1.4mm Nozzle 1 x Thermal Paste 4 x M3 Grub Screws 1 x Hex Key
€192.51
χωρίς ΦΠΑ €155.25
Μη Διαθέσιμο
Επόμενα 128 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ