ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
128
1Kg eSun Black PLA+ 1.75mm
1212.006
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
StaticBoards Ramps 1.4 SB Premium Board
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
10cm Original Capricorn PTFE (Teflon) 1.9x4mm
1140.250
***ΤΟ ΜΕΓΙΣΤΟ ΜΗΚΟΣ ΣΕ ΣΥΝΕΧΟΜΕΝΟ CAPRICORN ΕΙΝΑΙ ΜΕΧΡΙ ΕΝΑ ΜΕΤΡΟ*** Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
3D Printer A4988 Reprap Stepper Motor Driver Module
1116.078
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
1Kg eSun White PLA+ 1.75mm
1212.014
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
DRV8825 Stepper Driver Module with Heatsink for Arduino
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Original E3D V6 Silicone Sock
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
1Kg eSun Cold White PLA+ 1.75mm
1212.036
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
1Kg eSun Solid Black PETG 1.75mm
1212.020
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Arduino Nano CNC Shield V4 - Stepper Motor Driver for Arduino (GRBL Compatible)
1116.971
This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...
€7.73
χωρίς ΦΠΑ €6.23
Σε Απόθεμα
+ −
1Kg eSun Silver PLA+ 1.75mm
1212.010
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original Prusa i3 MK2/S to MK2.5 upgrade kit with Smooth double-sided PEI Steel Sheet
1145.025
We are aware of that the full upgrade from Original Prusa i3 M2/S to MK3 is a little bit pricey, so we came up with the second best option - the MK2.5 upgrade. It gives you the best features of magnetic bed with spring steel sheet, whole new extruder head with Bondtech and Noctua fans goodness...
€99.20
χωρίς ΦΠΑ €80.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€86.80
χωρίς ΦΠΑ €70.00
Μη Διαθέσιμο
1Kg eSun Fire Engine Red PLA+ 1.75mm
1212.045
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun Gold PLA+ 1.75mm
1212.011
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
1Kg eSun Black eTPU 95A 1.75mm
1212.069
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with...
€36.90
χωρίς ΦΠΑ €29.76
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm
1134.034
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
1Kg eSun Grey PLA+ 1.75mm
1212.008
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun Blue PLA+ 1.75mm
1212.013
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Prusa i3 MK3 Multi Material 2.0S (MMU2S) upgrade kit (Black Printed Parts)
1145.075
Multi Material Upgrade 2S (MMU2S) is a brand new an improved version of the Multi Material Upgrade 2.0. With an easier calibration process, new filament sensor and a standalone filament buffer, the MMU2S is more reliable than ever before . WITH THE ORIGINAL PRUSA MMU2S WE ARE...
€349.00
χωρίς ΦΠΑ €281.45
Σε Απόθεμα
+ −
1Kg eSun Solid White PETG 1.75mm
1212.019
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original E3D Thermistor Cartridge
1134.019
3D Printer Thermistor Cartridge | E3D Online | E3D Online A custom made thermistor encapsulated into an easy to use cartridge package. Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs...
€9.99
χωρίς ΦΠΑ €8.06
Μη Διαθέσιμο
1Kg eSun Purple PLA+ 1.75mm
1212.012
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Prusa MK3 Filament Sensor
1145.013
Optical filament sensor for the Original Prusa i3 MK3.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original Prusa Heatbreak by E3D (MK3/S/+, MK2.5/S, MMU2S)
1145.022
This product includes: Hotend heatbreak E3D (1 pcs) Thermal paste (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Custom heatbreak made together with E3D for the Original Prusa i3 MK3 and Multi-material upgrades.
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original Prusa Print Fan 5015 (MK3/S/+, MINI/+)
1145.005
This product includes: Print fan (1 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.
€10.90
χωρίς ΦΠΑ €8.79
Μη Διαθέσιμο
1Kg eSun Green PLA+ 1.75mm
1212.007
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.002
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
12V Fan 40x40x10mm (OEM)
1140.190
Big air flow. Low noisy. Long life. Specifications : Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 12V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm...
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Original Prusa Spring Steel Sheet With Smooth Double-sided PEI
1145.043
Uses the same PEI sheets as on the MK2/S. You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect the functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can...
€69.90
χωρίς ΦΠΑ €56.37
Σε Απόθεμα
+ −
1Kg eSun eSilk Rainbow PLA 1.75mm
1212.082
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega
1140.835
Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...
€7.96
χωρίς ΦΠΑ €6.42
Σε Απόθεμα
+ −
1Kg eSun Black ABS+ 1.75mm
1212.051
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Μη Διαθέσιμο
1Kg eSun Bone White PLA+ 1.75mm
1212.048
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.40mm
1134.056
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....
€152.89
χωρίς ΦΠΑ €123.30
Σε Απόθεμα
+ −
1Kg eSun Yellow PLA+ 1.75mm
1212.015
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
1Kg eSun Orange PLA+ 1.75mm
1212.009
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 1.75mm (Throat)
1134.027
This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...
€21.70
χωρίς ΦΠΑ €17.50
Σε Απόθεμα
+ −
Original Prusa Hotend Thermistor (MK3/S/+, MK2.5/S, MK2/S)
1145.012
This product includes: Hotend thermistor E3D (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Hotend thermistor for the Original Prusa i3 MK3.
€13.00
χωρίς ΦΠΑ €10.48
Μη Διαθέσιμο
Original Bondtech Direct Drive System for Creality CR10s/S4/S5
1143.024
>> How to Install << Bondtech's Direct Drive System (DDS) for CR-10S is designed to give the user more options - different materials; higher flow and/or wider nozzles; thinner layers - and achieve a higher print quality. The DDS includes an integrated BMG (Bondtech Mini Geared)...
€124.00
χωρίς ΦΠΑ €100.00
Σε Απόθεμα
+ −
1Kg eSun Grey PETG 1.75mm
1212.063
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 40W
1134.051
24v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a metre of sillicone...
€9.18
χωρίς ΦΠΑ €7.40
Σε Απόθεμα
+ −
1Kg eSun Red PLA+ 1.75mm
1212.037
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
έκπτωση 24%
έκπτωση 24%
Original Prusa MK3/S/+ E3D 40W 24V Heater Cartridge
1145.044
This product includes: Hotend heater cartridge E3D 24V 40W (1 pcs) Specifications: Voltage: 24V Wattage: 40W To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 E3D 40W 24V Heater...
€13.00 €9.90
Κερδίζετε: €3.10 χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
24V Fan 40x40x10mm (2pin)
1256.011
Big air flow. Low noisy. Specifications : Wire:2pin Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 24V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Bearing Type: Sleeve Cable...
€3.63
χωρίς ΦΠΑ €2.93
Μη Διαθέσιμο
L298N V3 x4 Stepper/DC Motor Driver
1215.418
This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
1Kg eSun Natural PLA 1.75mm
1212.016
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - extracted and purified from corn grain; - high rigidity, good glossiness and transparency; - suitable for printing larger models; - toughness is 2 times more than the PLA on the market; - no...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Bondtech Drivegear kit 1.75mm / 5mm shaft
1143.001
Prusa i3 MK2/S Printable Extruder Parts for Bondtech Drivegear kit https://www.thingiverse.com/thing:2683976 You will need the following parts: 1 x Bondtech Direct Gearset 1 x M3 thread bushing 1 x Thumbscrew assembly (Screw, spring, washer) 1 x Pin 3×20 mm M3 screws Bondtech DualDrive...
€56.90
χωρίς ΦΠΑ €45.89
Σε Απόθεμα
+ −
Original E3D Thermal Compound Paste
1134.067
€1.90
χωρίς ΦΠΑ €1.53
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
1Kg eSun Light Blue PLA+ 1.75mm
1212.040
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
0.5Kg eSun Wood PLA 1.75mm
1212.022
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - 1. High quality wood texture - 2. Non toxic and no smelling - 3. No heated bed necessary, sticks well to print bed - 4. Low processing temperature(about 190℃) - 5. Low shrinkage and good toughness
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
2x United Chemi-Con APXG160ARA221MF80G Capacitor for Creality Faulty Tempratures Readings
1161.001
CR-10S V2.0/V2.1 C4 Replacement Capacitor – 2 Pack Replacement SMD Capacitor for C4 Capacitor on the CR-10S V2.0/V2.1 Boards Information on replacement here (DIY Guide Link on page): CR-10S V2.0/V2.1 Temperature Repair Guaranteed to fix the temperature fluctuation issue Exact...
€1.24
χωρίς ΦΠΑ €1.00
Σε Απόθεμα
+ −
1Kg eSun ePA & Carbon Fiber 1.75mm
1212.031
Features: eSUN ePA-CF Carbon Fiber Filled Nylon Filament, Used in Structural Parts, Tough Parts. 1KG Net (approximately 2.2lbs) Filament with Clear Spool. eSUN ePA-CF 3D Printer Filament Vacuumed Sealed with Desiccant. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended...
€63.00
χωρίς ΦΠΑ €50.81
Μη Διαθέσιμο
Original E3D Nozzle X V6-1.75mm-0.40mm
1134.102
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which...
€47.90
χωρίς ΦΠΑ €38.63
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Black Zaribo 320 Extrusion Kit by Misumi
1147.007
ll parts are factory cut and drilled with precision by Misumi engineers. Package content: X-Y Axis 2 HFSB-3030-354-Z8-XA12-XB342 x-axis 2 HFSB-3030-320-TPW-Z8-XA100 y-axis Z Axis 2 HFSB-3030-430-TPW Black 3030 Normal Rigidity...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 12V 30W
1134.017
3D Printer Ceramic Heater Cartridge - 12v - 30w | E3D Online | E3D Online 12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original Prusa MK2s/MK3 U-Bolts
1145.008
3 U-bolts for holding the LM8UUs on the MK2S Y-carriage. M3 nuts are included.
€9.99
χωρίς ΦΠΑ €8.06
Σε Απόθεμα
+ −
Original Prusa i3 MK2/s & MK3 Y-Axis Belt
1145.045
Y Axis belt for Original Prusa i3 MK2/S and MK3.
€6.60
χωρίς ΦΠΑ €5.32
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 30W
1134.018
3D Printer Ceramic Heater Cartridge - 24v - 30w | E3D Online | E3D Online 24v 30w Ceramic Heater Cartridge Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. These 30w heaters provide a fantastic balance of being...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Genuine Einsy Rambo 1.1 by Ultimachine
1147.005
This is Einsy Rambo 1.1a. The Einsy Rambo board is an all in one 3D printer motherboard. It is a compact version of our RAMBo v1.3L design with the Arduino MEGA and stepper drivers all on one integrated PCB. A great alternative board if you need just the basics! Major Features - 4 x integrated...
€133.80
χωρίς ΦΠΑ €107.90
Σε Απόθεμα
+ −
12V Fan 90x90x25mm (OEM)
1140.191
Rated Voltage : DC 12V External Material : Plastic Main Color : Black Connector : 2 Pin Size : 90 x 90x 25mm/ 3.5" x 3.5" x 1" (L*W*H) Cable Length : 17cm/ 6.6" Weight : 62g Provides excellent air ventilation for your PC case, computer CPU fan, or other matched radiator....
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Black Zaribo 220 Extrusion Kit by Misumi
1147.008
All parts are factory cut and drilled with precision by Misumi engineers. Package content: X-Y Axis 2 HFSB-3030-354-Z8-XA12-XB342 x-axis 2 HFSB-3030-320-TPW-Z8-XA100 y-axis Z Axis 2 HFSB-3030-330-TPW Black anodize 3030 Normal...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€74.40
χωρίς ΦΠΑ €60.00
Σε Απόθεμα
+ −
DMA860H CNC Stepper Drive Stepping Motor Driver
1140.790
Features • Good high speed performance • Supply voltage up to 80VAC or +110VDC • Output current up to 7.2A • Self-adjusting technology • Pure-sinusoidal current control technology • Pulse input frequency up to 300 KHz • TTL compatible and optically isolated input •...
€60.46
χωρίς ΦΠΑ €48.76
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.006
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original Prusa Timing pulley T16-2GT (MK3/S/+, MK2.5/S, MΚ2/S, MINI/+)
1145.002
This product includes: Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) To replace the part/s, please consult our Assembly Manuals . Make sure to follow the manual for your printer model.Original Prusa MK3 GT2-16 Pulley
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
1Kg eSun Solid Silver PETG 1.75mm
1212.064
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
έκπτωση 11%
έκπτωση 11%
Brushless Cooling Fan 40mm x 40mm x 20mm 24V
1256.012
Dimensions:(40x40x20)mm Operating voltage: 24V Current: 0.8W Speed: 6000rpm
€5.05 €4.49
Κερδίζετε: €0.56 χωρίς ΦΠΑ €3.62
Σε Απόθεμα
+ −
1Kg eSun Brown PLA+ 1.75mm
1212.044
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Original E3D Volcano Silicone Sock
1134.011
Silicone Socks for E3D Volcano Heater Block and Nozzles These socks will keep your heater block clean and free from burnt and blackened plastic. They don’t just keep the block clean, but also keep heat inside the HotEnd and off your print. Made of a heat-resistant, non-stick silicone...
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
MKS DET Outage Detection Module - Power Safety (Connects to MKS TFT)
1140.005
Connection： Connect the power input (blue terminal) and UPS to 110V/220V power supply at the same time. MKS DET MKSTFT PB0 B0/PB0 GND - 3.3V + Description: 1. MKS TFT already has the fuction of continuous printing from...
€6.72
χωρίς ΦΠΑ €5.42
Σε Απόθεμα
+ −
1Kg eSun Natural PETG 1.75mm
1212.018
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original Bondtech Push-Fit connector 4 mm
1143.011
Push-fit connector for 4 mm PTFE tube. Assembles into a pocket with 8.0 mm diameter and a depth of 6 mm.
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
Original Prusa RAMBo Mini Heatbed Connector
1145.009
RAMBO mini Heatbed Connector
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
1Kg eSun Solid Grey PETG 1.75mm
1212.065
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
235*235mm Flexible Magnetic Build Surface Plate with Heated Bed Sticker For Ender-3
1215.858
- Upgrade magnet Build Surface plate - Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top...
€17.92
χωρίς ΦΠΑ €14.45
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.25mm
1134.031
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
1Kg eSun Natural PLA-LW 1.75mm
1212.103
Features: ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use...
€29.90
χωρίς ΦΠΑ €24.11
Μη Διαθέσιμο
Original Prusa Festo Pneumatic for MMU (QSM-M5)
1145.056
Original Prusa Festo Pneumatic for MMU
€4.90
χωρίς ΦΠΑ €3.95
Σε Απόθεμα
+ −
Original E3D Super Whopper Stepper Motor - 1.8° / 2A / 8kg/cm Holding Torque
1134.077
If planning on using this motor, we suggest using a high current stepper driver such as the DRV 8825 . Whilst standard drivers such as the A4988 can produce the 2.0A rated current of this motor, this is at the limit of their specification so they may be prone to overheating, triggering their...
€37.20
χωρίς ΦΠΑ €30.00
Μη Διαθέσιμο
Zaribo Extruder Motor Nema17 1.8° by LDO
1147.037
New motor design. Motors stay cooler during printing.
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
Prototype 8x12cm PCB Double Side Bread board FR4- Διάτρητη Πλάκέτα Διπλής Όψης
1140.142
Grid : 0.1" (2.54mm) Thickness : 1.6mm Hole diameter : 0.9mm Material : FR-4 (glass fiber) All holes are plated through Both sides are identical Size details : Size 80mm x 120mm Holes : 30 x 42
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
1Kg eSun Grey eTPU 95A 1.75mm
1212.071
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with high...
€36.90
χωρίς ΦΠΑ €29.76
Σε Απόθεμα
+ −
Original Bondtech Drivegear kit 2.85mm & 3.00mm / 8mm shaft
1143.002
Bondtech DualDrive gears for 2.85-3.0 mm filament, Precision custom cnc machined with extreme precision guarantees that you get the grip you always wanted. Manufactured in hardened steel with an protective surface treatment will give you long lifetime and extreme reliability. The gears come as...
€56.90
χωρίς ΦΠΑ €45.89
Σε Απόθεμα
+ −
1Kg eSun White eTPU 95A 1.75mm
1212.070
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with high...
€36.90
χωρίς ΦΠΑ €29.76
Σε Απόθεμα
+ −
έκπτωση 13%
έκπτωση 13%
Original Prusa MK3/S/+ Heatbed Thermistor
1145.011
Heatbed thermistor for the Original Prusa i3 MK3.
€9.99 €8.70
Κερδίζετε: €1.29 χωρίς ΦΠΑ €7.02
Σε Απόθεμα
+ −
1Kg eSun Pine Green PLA+ 1.75mm
1212.042
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original Prusa i3 MK3/S to MK3S+ upgrade kit
1145.138
Original Prusa i3 MK3/S to MK3S+ upgrade kit Upgrade kit for the Original Prusa i3 MK3/S to Original Prusa i3 MK3S+. With this upgrade, we are introducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved plastic parts and u-bolts were changed to metal...
€31.00
χωρίς ΦΠΑ €25.00
Σε Απόθεμα
+ −
Original Trinamic StepStick Protector
1201.002
Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...
€9.70
χωρίς ΦΠΑ €7.82
Σε Απόθεμα
+ −
1Kg eSun Solid Red PETG 1.75mm
1212.021
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
1Kg eSun Light Brown PLA+ 1.75mm
1212.046
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
1Kg eSun eSilk Gold PLA 1.75mm
1212.083
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
MKS-GEN L V1.0 Controller Mainboard Compatible Ramps1.4/Mega2560 R3 For 3D Printers
1215.538
1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. 2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. 3. Reserve external driver signal, available to...
€45.92
χωρίς ΦΠΑ €37.03
Σε Απόθεμα
+ −
1Kg eSun Cold White ABS+ 1.75mm
1212.052
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.30mm
1134.032
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D Slimline Stepper Motor 1.4A / 0.9°
1134.047
A Nema17 12.7N-cm stepper motor with D-shaft and 1.0m wiring. Ultra-Slim NEMA17 Stepper Motors for use with your Titan extruder. Only 25mm body length, producing 12.7N-cm of torque these motors make an excellent choice for use on your extruder. These motors have been custom made for use with...
€20.71
χωρίς ΦΠΑ €16.70
Μη Διαθέσιμο
Original E3D Hobb-Goblin - 5mm ID Drive Gear
1134.013
Hobb-Goblin - 5mm ID Drive Gear for 3d Printers | E3D Online A wicked little filament drive gear made from stainless steel with really sharp little teeth cut into it. These are carefully manufactured on a synchronised CNC processs which gives a sharp, consistent, and clean cut tooth profile...
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
1Kg eSun Black eASA 1.75mm
1212.073
Specification： - 1.75mm Characteristics： - With a similarity in structure, eASA has excellent mechanical physical property as engineering plastics. - Because the butadiene with double bond is replaced, eASA is given outstanding weather resistance, high temperature resistance and...
€35.90
χωρίς ΦΠΑ €28.95
Σε Απόθεμα
+ −
έκπτωση 24%
έκπτωση 24%
VNH2SP30 30A Stepper Motor Driver module for Arduino
1215.784
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and...
€11.76 €8.95
Κερδίζετε: €2.80 χωρίς ΦΠΑ €7.22
Σε Απόθεμα
+ −
CNC / router / engraver MACH3 Tool Setting Auto-leveling instrument
1215.623
High precision ground block for drill bit leveling. Diameter : (Approx.) 35mm Height : (Approx.) 20mm Effective surface of the cutting tool: 25mm diameter Including alligator clips. Cable length : 1.2 m, diameter : 0.2 square feet. Usage : Positive (Z-endstop) wire connects from the drill...
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
Original Bondtech Needlebearing for Extruder Mini
1143.004
High precision needle bearing that is used in our Bondtech Mini, for shaft diameter 5.0 mm, two pieces is used for one drivegear.
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
1Kg eSun Peak Green PLA+ 1.75mm
1212.039
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Mosaic CANVAS Hub
1221.003
Ξεστοκάρισμα χωρίς εγγυήση. Introducing: CANVAS Hub CANVAS Hub is the keystone of Mosaic’s multi-material ecosystem. Think of it as the center of everything to do with multi-material printing, and the bridge that allows your hardware products to communicate with each other and come...
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
1Kg eSun Natural eTPU 95A 1.75mm
1212.072
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with...
€36.90
χωρίς ΦΠΑ €29.76
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.007
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original Bondtech Shaft 4mm, L=25 mm
1143.007
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.86
χωρίς ΦΠΑ €1.50
Σε Απόθεμα
+ −
1Kg eSun Orange PETG 1.75mm
1212.062
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
1Kg eSun Luminous Green PLA+ 1.75mm
1212.049
PLA material is less distortion than ABS (Acrylonitrile Butadiene Styrene), heater bed do not necessarily need to Environmentally friendly and is one of the Biokompatiblen plastics Non flammable and is suitable for large 3D printing results High-quality premium filament – Airtight and...
€24.90
χωρίς ΦΠΑ €20.08
Σε Απόθεμα
+ −
1Kg eSun Yellow PETG 1.75mm
1212.061
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
1Kg eSun Luminous Blue PLA+ 1.75mm
1212.050
PLA material is less distortion than ABS (Acrylonitrile Butadiene Styrene), heater bed do not necessarily need to Environmentally friendly and is one of the Biokompatiblen plastics Non flammable and is suitable for large 3D printing results High-quality premium filament – Airtight and...
€24.90
χωρίς ΦΠΑ €20.08
Σε Απόθεμα
+ −
5V 4010 Fan 40x40x10mm
1256.249
Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 5V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Original E3D Heater Cartridge 12v 40w
1134.052
12v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly-toleranced enamel resistors and switch to a purpose-made high-power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a meter of sillicone...
€9.18
χωρίς ΦΠΑ €7.40
Μη Διαθέσιμο
Inductive Proximity Sensor Switch - NPN NC DC6-36V M8 (LJ8A3-2-Z/AX)
1215.978
Product Name: Inductive Proximity Switch Model: LJ8A3-2-Z/AX Wire Type : DC 3 Wire (Brown ,Black, Blue) NPN; Switch Appearance Type : Cylinder Theory : Inductive Sensor; Output Type : NC(Normal Closed) Diameter of Head : 8mm; Detecting Distance : 2±10%mm Detecting...
€4.36
χωρίς ΦΠΑ €3.52
Σε Απόθεμα
+ −
Original E3D Nozzle Pro Pack - 1.75mm
1134.065
This pack is the pinnacle of nozzle prowess, featuring six of our most exciting, useful and experimental nozzles. Brass, Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases. Not to mention, this pack means you get more...
€114.89
χωρίς ΦΠΑ €92.65
Μη Διαθέσιμο
Creality 3D CR-10 S4 X-axis belt
1156.012
Creality 3D CR-10 S4 X-axis belt
€6.57
χωρίς ΦΠΑ €5.30
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.25mm
1134.053
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
1Kg eSun Solid Orange PETG 1.75mm
1212.067
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red,...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.80mm
1134.059
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
1147.016
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
AT2100 Stepstick Stepper Motor Driver With Heat Sink
1215.685
Supply Voltage: 3.3V-5V Dissipation Power: 2.5A Operating Temperature: -40°-+85°
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
1Kg eSun Fire Engine Red ABS+ 1.75mm
1212.058
ABS is Acrylonitrile Butadiene Styrene a 3D printing plastic. It’s a versatile petroleum-based material that belongs to a family of thermoplastic polymers. ABS is a strong material and is easy to modify the parts after printing for its higher melting point. With the exclusive professional...
€18.90
χωρίς ΦΠΑ €15.24
Σε Απόθεμα
+ −
1Kg eSun Magenta PLA+ 1.75mm
1212.041
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Επόμενα 128 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ