Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

TPA3116D2 Bluetooth Amplifier 2.1 Subwoofer Digital Audio Board 50+50W+100W
Κωδικός e-Wireless: 1140.574

BrandOEM MPNOEM
50.39
χωρίς ΦΠΑ 40.64
Σε Απόθεμα
+
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί e-Wireless;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

E-WIRELESS

Αναλυτική Παρουσίαση

This is a support Bluetooth 4.2 audio receiver, with a pre-amplifier, Bass crossover  Processing. With bass, left and right channel volume adjustment, treble adjustment, the total volume potentiometer control 2.1 amplifier board.
 
Use DC power supply: 12-24V power supply, Maximum support 50W (left channel) +50 W (right channel) +100 W (bass channel) three-channel output.
 
Is the use of the United States TI company TPA3116D2 high-performance digital amplifier chip as the core, a parallel bridge subwoofer output, do a left and right channel output.
 
Wide operating voltage, power-saving design, efficiency up to 90%. You can use good performance switching power supply, laptop switching power supply, you can also use the charging bottle, or car power supply and so on.
 
Board is a good test of the finished product board is welded, according to figure connected to a good speaker, audio input or connect the Bluetooth audio device and connected to the power can be used.
 
 
Volume potentiometer:
 
Volume potentiometer left turn is to adjust lower volume, turn right is to adjust HIGH volume. Press Down is thefunction switch
 
Function switch Instructions for use:
 
1. Plug in the power on default Bluetooth mode
2. Bluetooth disconnected, long press switch can switch to audio input mode
3. Bluetooth play status, short press the switch to pause / play
 
 
The main technical parameters: 
 
Dimensions: 
 
101 (W) x 100 (D) x 25 (H) mm, excluding potentiometer and socket projection
 
Voltage range: DC 11-25V (Current 3-4A, or 19-24V / 4-5A, such as high power requirements 20-24V / 8-9A above)
 
Subwoofer frequency range :20Hz~200Hz
 
Bluetooth receiving distance:> 8 m (meters)
 
Audio input sensitivity: 600-800mV, frequency response range: 20Hz-20KHz,
 
Speaker impedance: left and right channel speakers: 4-8 ohm, Bass speaker impedance: 2-8 OHM,

e-Wireless

Τεχνικές Προδιαγραφές

Brand:
OEM
MPN:
OEM
SFP28 (25G):

e-Wireless

Ρωτήστε μας

e-Wireless

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

e-Wireless

BEST SELLERS

e-Wireless

BEST SELLERS