Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Original E3D Cyclops+ Air-Cooled 12v 1.75mm
Κωδικός e-Wireless: 1134.037

BrandE3D MPNE3D Cyclops+ Air-Cooled 12v
130.53
χωρίς ΦΠΑ 105.27
Σε Απόθεμα
+
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί e-Wireless;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

E-WIRELESS

Αναλυτική Παρουσίαση

Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V and 24V.

Suitable for 1.75mm bowden setups only.

Still dual extrusion in a tiny package; now with new compatibility and features.

These beasts have evolved. Choose from classic air, or new-water-cooling, and experience the multi-extrusion possibilities of Chimera+ and Cyclops+. Read more on our blog!

  • Multi-Extrusion Choose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.
  • Ecosystem Compatibility Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. Chimera+ works with our full range of E3D nozzles. The watercooled variants work with our standard water-cooling kit.

    Cyclops+ and Chimera+ are both now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.
  • Unique Cyclops Hotside The Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.

    The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
  • Water Cooling By switching to an Aqua water-cooled heatsink, both all-metal HotEnds can be used in the hottest of ambient environments.

    The Cyclops Aqua and Chimera Aqua share a highly effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing. It's so small and lightweight that if you're looking for a water-cooled V6 equivalent then look no further!

Package Contains

  • Air-cooled heatsink
  • 2x black plastic collets
  • 2x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing
  • 12V fan
    • 0.4mm Cyclops nozzle
    • Cyclops heater block
    • 2x Kraken heatbreaks
    • Cyclops+ hotside fixings kit
    • Heatsink Compound
    • 30W Heater cartridge (12V/24V)
    • Thermistor cartridge

e-Wireless

Τεχνικές Προδιαγραφές

Brand:
E3D
MPN:
E3D Cyclops+ Air-Cooled 12v

e-Wireless

Ρωτήστε μας

e-Wireless

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

e-Wireless

BEST SELLERS

e-Wireless

BEST SELLERS