Product code: 
IH-G07-F2425-V
HORIZON 7/2.4GHz

HORIZON series antennas are one of the most famous omnidirectional antennas available on the market. Carefully constructed, small, perfectly suited for the base stations of medium-range using a single access point. In locations where there is a large number of other networks, particular attention should be on the selection of the proper range for the cells and antennas should not have too big gain, because the access points connected to them are likely to receive unwanted signals coming to them from distant networks.

electrical

Frequency (min)
2 400MHz
Frequency (max)
2 500MHz
Gain
  1. 7dBi
VSWR (max)
2.00:1
Polarization
Vertical
Half Power Beam Width (-3dB) - horizontal
  1. 360°
Half Power Beam Width (-3dB) - vertical
  1. 24°
XPD (Cross Polarization Discrimination)
>18dB
Max Composite Power
50W
DC Ground
yes
Impedance
50Ω

mechanical

Connector
N female
Mounting Diameter
ø 38…51mm
Dimensions (excl. mount)
360x26mm
Weight (incl. mount)
0.28kg

enviromental

Enviroment
Outdoor, Indoor
Windload
14N (@170km/h)
IP Rating
IP64
Temperature
-30°C ... 80°C

compliance

ETSI EN 302 326-3 (CE)
compliant
2002/95/EC (RoHS)
compliant
2002/96/EC (WEEE)
compliant
Instalation tips: 

Fine adjustment of the antenna ensures the correct propagation of radio signals. Proper installation of the mast, antenna and cable provide a stable and proper operation of the antenna installation.

  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Mount antenna on the mast.
  • Level the mast or boom, check antenna vertical position.
  • Finally tighten the mounting screws.
  • Connect cable and insulate antenna connector.
  • Fasten cable to the mast or boom.
  • It is worth to note achieved link parameters.





  
  



    

  


      

      



  
      
  
  03/30/2016 - 07:47