Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

1212.006
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
19.90
χωρίς ΦΠΑ 16.05
Σε Απόθεμα
+
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
37.20
χωρίς ΦΠΑ 30.00
Σε Απόθεμα
+
1140.250
***ΤΟ ΜΕΓΙΣΤΟ ΜΗΚΟΣ ΣΕ ΣΥΝΕΧΟΜΕΝΟ CAPRICORN ΕΙΝΑΙ ΜΕΧΡΙ ΕΝΑ ΜΕΤΡΟ*** Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude...
2.50
χωρίς ΦΠΑ 2.02
Μη Διαθέσιμο
1116.078
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...
3.92
χωρίς ΦΠΑ 3.16
Σε Απόθεμα
+
1212.014
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
6.20
χωρίς ΦΠΑ 5.00
Σε Απόθεμα
+
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
2.50
χωρίς ΦΠΑ 2.02
Μη Διαθέσιμο
1212.036
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
11.20
χωρίς ΦΠΑ 9.03
Σε Απόθεμα
+
1212.020
Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...
23.99
χωρίς ΦΠΑ 19.35
Σε Απόθεμα
+
1116.971
This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...
7.73
χωρίς ΦΠΑ 6.23
Σε Απόθεμα
+
1212.010
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
1145.025
We are aware of that the full upgrade from Original Prusa i3 M2/S to MK3 is a little bit pricey, so we came up with the second best option - the MK2.5 upgrade. It gives you the best features of magnetic bed with spring steel sheet, whole new extruder head with Bondtech and Noctua fans goodness...
99.20
χωρίς ΦΠΑ 80.00
Σε Απόθεμα
+
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
86.80
χωρίς ΦΠΑ 70.00
Σε Απόθεμα
+
1180.150
1L Isopropyl Alcohol (IPA) 99.8%
12.00
χωρίς ΦΠΑ 9.68
Σε Απόθεμα
+
1212.045
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C -...
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
1212.011
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
19.90
χωρίς ΦΠΑ 16.05
Σε Απόθεμα
+
1180.149
Isopropyl Alcohol (IPA) 99.8% Cleaner Spray 400ml
9.00
χωρίς ΦΠΑ 7.26
Σε Απόθεμα
+
1212.069
eTPU-95A is an excellent flexible filaments . It’s soft structure , high resilience features bring more possibilities to 3D printing industry . While eSUN designs the eTPU-95A with better strength , easy to print, and compatible for more printers Feature Excellent soft texture ,with...
36.90
χωρίς ΦΠΑ 29.76
Μη Διαθέσιμο
1134.034
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
17.26
χωρίς ΦΠΑ 13.92
Σε Απόθεμα
+
1212.008
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
1212.013
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
19.90
χωρίς ΦΠΑ 16.05
Σε Απόθεμα
+
1145.075
Multi Material Upgrade 2S (MMU2S) is a brand new an improved version of the Multi Material Upgrade 2.0. With an easier calibration process, new filament sensor and a standalone filament buffer, the MMU2S is more reliable than ever before . WITH THE ORIGINAL PRUSA MMU2S WE ARE...
349.00
χωρίς ΦΠΑ 281.45
Σε Απόθεμα
+
1140.761
Motor Length: 76mm Rate Current: 2.8A Voltage: 3.2V Phase resistance: 1.13Ω Phase inductance: 3.6mH Holding Torque: 19kg.cm Lead Wire NO. : 4 Detent Torque: 0.4kg.cm Rotor Inertia: 300g.cm Motor Weight: about 1kg General Specification: Step Angle:1.8 degree Temperature: 80℃ max Ambient...
37.20
χωρίς ΦΠΑ 30.00
Μη Διαθέσιμο
Επόμενα 24 προϊόντα
Φίλτρα Φίλτρα